Question about iLO 3200 32 in. LCD Television

2 Answers

ILO IWT3206 THE FUSE BLOWS WHEN I TURN IT ON

Posted by on

  • tonylewiston Jun 07, 2008

    same here just after 1 year sad but true looks lik im scrooed

×

2 Answers

The problem is one of the four diodes in the power supply.(i had the same problem) .the only other thing that would cause this is a shorted horizontal
output tranistor

Posted on Jun 02, 2008

The switch mode driver transistor is also a common proble causing the fuse to "blow."

Posted on Aug 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote control


you should be able to get a Universal remote and the codes for your TV. you'll most likely have to sit and enter codes till you get the right one though.

Oct 03, 2009 | iLO 3200 32 in. LCD Television

1 Answer

Lousy sound


If you don't have the Audio Output RCA jacks on the back then you can't. The other way would be to have a cable box and use the audio out from there.

May 17, 2009 | iLO 3200 32 in. LCD Television

3 Answers

Need owners manual



go to this website for manual
www.orionsalesinc.com/docman

Dec 14, 2008 | iLO 3200 32 in. LCD Television

1 Answer

Ilo-iwt3206


If the fuse is in direct line with the main power supply, the supply itself has failed.  If it is on the output side of the supply (there may be several different voltages present), the next place to look would be the backlight circuit that generates the somewhat high voltage for the fluorescent backlight. 
None of these points may have an obviously bad part and would require some understanding of electronics and at the minimum, a multimeter to troubleshoot.
What you can do by eyeball is to look for a separate board (there may be two; one for the low voltage circuits and the mentioned backlight supply) and examine them for signs of failed capacitors that may have caused further damage so that finding and replacing these may not cure the problem. A catastrophically failed cap will have a bulging top or crystaline deposits around its base. These bear markings in volts and microfarads such as '47uFd 16V.'
Replacement of these would require a decent soldering iron, rosin core solder and some care since the circuit boards may be easily damaged.
I doubt that whole replacement boards will be available since Ilo has sunk back into the pit that Walmart got them from. They were being serviced by Initial Technology in California but I think they are denying any relationship to the company that made these turkeys.
Initial Technology      

Oct 22, 2008 | iLO 3200 32 in. LCD Television

3 Answers

Blown fuse


check mcm electronics, if the fuse keeps blowing you have bigger problems.

Sep 03, 2008 | iLO 3200 32 in. LCD Television

2 Answers

Ilo model # iwt3206


i would just go buy a system selector and go rite to the rf tuner ,just flick a swith and start playing

Apr 29, 2008 | iLO 2600 Television

1 Answer

Ilp iwt3206 32" sdtv


Next best guess is the larger filter capacitors in the power supply are bad and shorted out, you can check with an ohm meter across capacitor leads (with power unplugged)

Apr 21, 2008 | iLO 3200 32 in. LCD Television

1 Answer

Need to order remote


http://www.remotecontrolscenter.com/ilo/

or
http://www.funai-corp.com/support/contact.aspx the maker of tv.

Dec 15, 2007 | iLO 2600 Television

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you an iLO Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...