Question about Frigidaire GLER642A Electric Dryer

4 Answers

Frigidaire Dryer WOn't Heat

My Frigidaire Dryer won't heat - I suspect it is the heating element. How do I change it and verify that it is the problem. The dryer tumbles. The model number is GLER642AS3 - Thanks

Posted by on

  • 3 more comments 
  • Jerryb382 May 03, 2008

    Dryer won't heat, checked the 220 and it is good. have new coil for heater but don't know how to remove the heater. Have lifted the top and can see the heater but don't know how to remove it.

  • Anonymous Jul 31, 2008

    where do I find the thermal fuse on frigidaire dryer and hoow to replace it.

  • dgelpke Nov 21, 2008

    I have a Frigidaire Dryer. I am trying to find the fuses. Apparently, one of the fuses may be dead, and that would stop the heating of the clothes but not the tumbler.


    It may also be the heater.

  • Anonymous Mar 08, 2009

    dryer won't heat and i've replaced the termistor what should i do next?

  • Gary Davd
    Gary Davd May 11, 2010

    do you have 240volt into the dryer (at the plug)?? a dryer will tumble but wont heat if the power is missing a leg check that first

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a frigidaire frontal dyer that is 3 yrs old. The dryer works properly, it tumbles, but it is only cold air ???? What's the problem ?

Posted on Sep 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dryer wont heat at all

Posted on Jun 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 156 Answers

After u cjk power ck the thermo fuse inside dryer top back side

Posted on Mar 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please check control thermistor first. Most likely and inexpensive part.

MK

Posted on Sep 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dryer runs but won't heat


You will need a professional to diagnose the thermal limiter, small version of a fuse, heating element and the dryer/blower assembly.

Aug 17, 2012 | Frigidaire Electric Dryer

1 Answer

Whirlpool dryer overheats element high heat all heat settings


First check the heating element for short to frame. If it is not shorted remove the filter chute and clear it out. The control thermostat has 4 wires. 2 small wires come from the timer and power up a small heater inside the control thermostat making it shut down faster for perm press and knit cycles. Over time this bimetal inside the control stat won't shut down fast enough or not at all. If it won't shut down then the element will gl;ow reed and the base 250 stat on the heater chamber will shut down. If it fails to do so then the smaller one up top will trip at 300f. If it fails to trip or the filter chute is clogged the fuse skinny white plastic thing next to the control tstat will met and shut down operation.
Here is my HOME MOVIE ROPER DRYER NO HEAT
It shows the various components and how to check.

Jul 31, 2012 | Dryers

2 Answers

Won't heat up


If it won't heat it will be either the heating element or the thermostat or the control board.

Aug 28, 2011 | Whirlpool GEW9250 Electric Dryer

1 Answer

I have 75 volts ac at the heater element


Hi,
Checkout the tip for the electric dryer...you have a problem with something cutting out the current before the element...probably the high limit ...
If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Aug 04, 2010 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Heating element looks okay, like new what else can it be that causes the dryer not heat


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Aug 02, 2010 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Dryer will not heat. I replaced the heating element and the fuse on the house and still no heat.


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Jul 17, 2010 | Frigidaire Electric Dryer

1 Answer

Frigidare gallery not heating. possibly heating element is gone out how hard is it to replace


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Jul 01, 2010 | Frigidaire FER231A Electric Dryer

2 Answers

Electric dryer not heating


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Jun 01, 2010 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Dryer won,t heat, put in new element and still won,t heat.


check you thermal fuse for continuity if none change it and the high-imit safety shut-off fuse(closest to heat element)

Apr 08, 2009 | Dryers

Not finding what you are looking for?
Frigidaire GLER642A Electric Dryer Logo

Related Topics:

3,235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...