Prints test copy everytime I turn unit on

You can turn this off in the settings menu.

You need to put the alignment page on the scanner unit and press ok.

I think probably it's a print alignment page, if you read the page it will probably give you instructions to place the page on to the scanner at the top and press a button for it to scan and automatically set the alignment. Do so and it should fix it :)

Replace ALL ink cartidges with NEW HP cartridges.

Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.

Steps

1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.

Thanks
Rizwan
[email protected]

check the print queue from the computer (printers and faxes, right click printer icon, cancel all documents)

It easy. When you turn on the printer - press and hold cancel.

sure..you'll need to re install the software, and then register the printer when asked.

cannot load new ink cartridge c 3150 black cartridge keeps popping out when you close acces door help thanks harry

Hi,

I belive that after replacing the INk cartridges, you are experiancing this problem. The Alignment test sheet always prints everytime you turn on the printer, if u haven't completed the Alignment process.

To complete the Alignment process,
>>Once the printer finished printing the Alignmnet test sheet.
>> Place the Test sheet staright on the scanner glass facing down towards right hand corner.
>>Press the scan button(color), the Power ON light will start flashing, wait until it stops flashing.
>>Alignmnet process completed.


Thank You