I can't play region 1 dvd on my samsung BD-P1500 the disc we are trying to watch is a region 1 but our player is a region 4 how do we change the region so we can play region 1 dvd's but still be able to play all region dvd's

Here is a solution: http://www.videohelp.com/dvdhacks/samsung-bd-c6900/10895

Please note, however, that even after region code hack, it may remain NTSC only, so if you are planning to play European DVDs recorded with PAL system, it may not work.

alba dvd player ds-a651 unlock region code please

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__xd3w2

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_yt67y

Try this Site, may get you going:


http://www.ehow.com/how_5091093_change-region-dvd-player.html


Read Ya,
Z

it seems that samsung is posting it's firm updates online @ samsung.com i had same problem with my BD-UP5000 its connected to the internet when i go to the menue to update on the bluray player it said i had the latest update went online and found a new firmware on there web site, check samsung web site

If its not a Blu-Ray disc, it wont have new technology that the Blu-Ray does not have installed so its unlikely a firmware update wil fix this as its generally for new Blu-Rays.

Does the disc playback in another player?

Is it the correct region code?

Do all other DVD-Video play ok?

possibly because the regions are different to dvd than blu ray, there are 8-9 for Dvd and 3 for blu ray.

Below is a known process to unlock your region settings. Not 100% surefire.

1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.

2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner

3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 76884

Now it to me about 20 tries to get this to work, It needed to be done without delay.
So if you don’t get it to work straight away don’t loose heart.

4) When it works a 4 will appear in the top left corner

5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.

8) Power the unit off

9) Now power the unit on again, it should now read all regions of DVD Disc.

From other threads I got the follow list of region codes.

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

Post back and let me know if this works. Thank you for trying Fixya!

I have a new BD-P1500, and after 5 Times

The trick seemed to be not holding the repeat key too long.

I have a Region B/4, running
090417_01_BDP1500_XAX.RUF
I used the R4 code from below.

1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 76884

Now it to me about 5 tries to get this to work, It needed to be done without delay.
So if you don’t get it to work straight away don’t loose heart.

4) When it works a 4 will appear in the top left corner

5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.

8) Power the unit off

9) Now power the unit on again, it should now read all regions of DVD Disc.

From other threads I got the follow list of region codes.

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462




Report this hack (requests/questions/spam/wrong/****).-->
Region code hack posted by wasgo, September 17 2008:
I have tried the hack mentioned above on my new BD-1500 and couldn't make it work. But the software in it is about a month newer.
Does anybody have any new ideas how to solve the problem?
I have the region 2 version (Sweden)