Your door interlock is not makeing contac.chack the front door to see if it is lineing up whit the covers or see ifyou brook aneything inside the front cover whear you added toner.the interlock is in the front door of the michane also you can make sure all of the other doors is closed.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes, either the lamp or photo sensors in the scan assembly. You need a torx driver to remove the top and back covers and check that all ribbon cables are plugged in fully, sometimes a poor connection can cause that problem.
Buy a Brother 2100 All in one for 169 or less then goto 123 inkjet and get color cartridges for only 4.50 each (and the large ones too not dinky cartridges) plus for the price of a new printer you get the ink in it which would cost you the price of ink anyway for the HP so think as it as a free printer
123inkjet.com - for 50 dollars I got 3 black 2 majenta 2 yellow and 2 blue and they were sent to me through general mail us to canada so no duties but did take 4 weeks or more
Sounds like the printer thinks the cartridge is empty.
Old PSC units had a 3 cartridge memory - you kept 3 cartridges and cycled them to trick the printer into thinking it had just received a brand new cartridge, rather than a refilled one.
Check Paper light flashes but there isn't a paper related problem
The check paper light may also flash if there are other problems. Verify the following conditions:
Verify that the print cartridge door is closed.
The print carriage may be jammed, follow these steps to correct the problem:
Open the print cartridge access door. If the print carriage can move, it should move to center. If the print carriage stays all the way left, unplug the power cord and then plug it back in. This will reset the unit and may allow the print carriage to move from the left.
Disconnect the power cord from the all-in-one.
Remove both print cartridges.
Move the print carriage left and right slightly to verify that the print carriage will move freely. If the print carriage will not move freely, check for obstructions.
Close the print cartridge access door.
Plug the power cord back in.
After the all-in-one initializes, the print cartridge light will flash. Open the access door and install the print cartridges.
Close the print cartridge access door. If the problem returns, remove the print cartridges and wipe the electrical contacts before reinstalling them.
Try to make a copy. If the all-in-one pulls in paper but cannot make a copy, there may be a problem with the scanner mechanism. Contact HP for assistance.
What is not working? The printer or the cartridge? If it's the cartridge, try this. fold a paper towel in 4ths, dampen it and place on a flat surface. Blot the cartridge several times on the towel. You should get blots of black with the black cart. and three colors with the color or photo cart. If not... replace. If the printer carriage just won't move and you're shure you have power.. time for a new printer.