Question about Audio Players & Recorders

1 Answer

Now power yo player

The subwoofer has power ,but the player will not function, Have checked connections

Posted by on

  • doctorz Mar 16, 2008

    I'm having a similar problem. It is on standby (red light is on), but the sub does not always kick on when music is playing. It seems to have to be at a certain volume for it to be triggered, and even then it does not always turn on. If I turn it on and off again while something is playing, it usually stays on, once again unless the volume is too low. Any ideas? It's a great sub and I hate to have to buy another (which would probably cost more than then entire speaker system cost when I bought them...). Thanks in advance.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Check audio drivers & audio out okk

Posted on Mar 15, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Klh powered subwoofer model ASW10-120B... when you plug in to power... it makes a loud buzzing/humming noise


I would check the caps on the power supply. They are rather large electrolytic capacitors that will look like they burst and/or leaking. When these die, the caps ground and the sub will make a loud buzzing sound. If you are handy with a soldering iron you can replace them yourself. Replace them with the same voltage or a little bigger and same with the size.

If the cap. says 16v 4700pF on it, for example, a 20v 5300pF or a 16v 6200mF cap. will work for this application.

when-plug-in-power-makes-loud-buzzing-lgqxs5x4gp2eri5a2qchwtne-5-0.jpg

when-plug-in-power-makes-loud-buzzing-lgqxs5x4gp2eri5a2qchwtne-5-1.jpg

when-plug-in-power-makes-loud-buzzing-lgqxs5x4gp2eri5a2qchwtne-5-3.jpg

Jan 05, 2016 | Audio Players & Recorders

1 Answer

I have the Peavey triflex ii I have power and sound in the subwoofer but nothing on the satellite speakers I get no sound o checked all fuses and they are good. Wires are also good


My recommendation would be to try the satellite speakers, each , by themselves, from another source, say another amplifier, with a cd player or mp3 player hooked up to the source to confirm the speakers themselves are indeed functioning. If you try this, and still have no sound from them, it is the speakers. If they work, then the amplifier section of the Triflex rig is not functioning. A lot of times, Peavey has had issues with the Power transformers going out in their amps. Might have happened. If the speakers don't function attached to another amp, then you may have a blown speaker/crossover/ or maybe an inline breaker or fuse in the speaker . You can remove the back panel of the speaker to check this. It would seem improbable for both to go out at the same time, so my thought would be a breaker on the amplifier section of the Triflex, or the amp itself.

May 01, 2014 | Audio Players & Recorders

1 Answer

My JVC SP-PWM508 no longer functions.


I am looking for the cable connecting the sub woofer and the main system(CD Player)

Mar 14, 2010 | JVC SP-PW100 Subwoofer

1 Answer

No sound from JVC do have sound from TV connected


hey man my names josh i used to work in home theatre if you can clarify what your problem is i can walk you through it my cell is 832 248 4144 on thing thing yo want to check with that no sound being produced out of of hdmi is to make sure that the port that you have it running to on your tv does not have a set of analog jacks next to it. if thats the case you want get your sound cause you will have to run sound with your hdmi next to that port on the tv that is if your tv has that function and providing you have more than one hdmi port on your tv it will most be the first port you have it pluged into if not you may need to check your wiring and your pre sets on the tv as well as your wiring that your have going to every thing cause i cant promise you that everyting may be hook up like it should but i can straiten that up for ya like i said my name is josh and my cell is 832 248 4144

Nov 02, 2009 | Audio Players & Recorders

1 Answer

My subwoofer stop working


I have a Sony 46" LCD TV. I have a Direct TV HD converter box, a Sony Blu-Ray BDP-S360 Blu-Ray player, and a Pioneer DVD-Audio player connected to my Pioneer Elite Home Theater receiver. I have my Pioneer DVD-A player connected via Fiber-Optic cable. When i play a DVD or a DVD-A on my Pioneer DVD-A player, all of my speakers work fine, but when i play a dvd on my blu-ray player, all the speakers work except my subwoofer. How can I fix this problem?

Jul 03, 2009 | Aspire Digital AD-225PSC Subwoofer

1 Answer

Sleep mode


It will power off if the frequency range of the signal being sent to it is set too low, or the amplitude of the signal is too low as well.

Try increasing the subwoofer crossover frequency and/or increase the gain from the LFE/SUB of the receiver/preamp you have it connected to. Also make sure that in the setup menus of ALL of your components have an LFE channel enabled such as by selecting the output of source material of your DVD player for example, to output 5.1. Otherwise, it will not send a signal for the subwoofer to play, nor will it play the signal if the crossover frequency is set too low.

Example; the setting on your DVD player setup menu is set to two channel: result with only one exception, subwoofer will not play

Example; subwoofer/LFE level on receiver/preamp set to -10dB and/or subwoofer volume too low. Result: subwoofer will not play.

Example; subwoofer crossover point set at 35Hz. Source material playing sound at 30Hz and lower. Result: subwoofer will not play.

Nov 23, 2008 | JBL PB10 Subwoofer

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98868 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...