Question about Sony Playstation 3 (PS3) Console

1 Answer

Upgrade to 2.17 of ps3

Made upgrade to 2.16can it cause the disc player to stop reading any disc ?

Posted by on

  • RajGamer Mar 18, 2008

    Same problem :(

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

I dont think so...i have it and about 10 games and none of mine messed up

Posted on Mar 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

It says unable to read disc when i put the game in.


Please Rate me!
What Is It? The Disc Read error is a simple one. It simply means that the Xbox is unable to read the disc that you have placed in the drive. In the majority of instances, this error has nothing to do with the functionality of the console, but, rather, hinges on the actual disc that has been inserted into the DVD tray.
Disc-Related Errors The most common reason for Disc Read errors are related to the disc itself. Numerous conditions can keep the laser from reading the information contained within the game, DVD or CD in the DVD drive.
  • The disc is scratched - Game discs, audio CDs and DVDs can become scratched very easily. Usually this is because they have not been kept in their cases, but left in the open. Simply resting two discs atop one another can scratch the bottom disc. If discs are sufficiently scratched, the data contained on them will be inaccessible to the drive.
  • The disc is dirty/dusty - Dirt and dust can build up on the faces of discs left exposed. When sufficient dirt or dust has built up, it can block the laser beam used to read the disc, resulting in a Disc Read error.
  • The disc is the incorrect region - DVDs come in formats called "regions." These regions match the region specified in the software of the DVD player. Some games also have these regions. If the region of the DVD and that of the player do not match, the disc will not play.
Can I Fix These Errors? Repairing disc-related issues may or may not be possible. If the cause is simply dirt and dust, you can certainly repair the disc. However, if the cause is due to extreme scratching, then replacing the disc is likely your only choice. If the disc is from the incorrect region or from another country, you will have to obtain the correct region. Returning the disc to the retailer for exchange may work.
Non-Disc Related Errors As mentioned, there can be some Disc Read errors that have nothing to do with the disc at all. In this case, it's time to troubleshoot the Xbox.
  • First, simply try to reboot the machine. Often, this will flush the cache or other error and allow the game to operate or the disc to play.
  • Second, try removing the hard drive and/or memory units. Once removed, reboot the console and attempt to load the disc with the hard drive and memory out of the unit. If this works, you can simply shutdown and reinstall the hard drive.
  • Attempt to play the disc in another type of player. For instance, attempt to play the DVD in another DVD player or the CD in a CD player. If the disc plays in these players, you may need to clean the Xbox DVD player.
  • Check to make sure that all air vents are open and are able to provide sufficient airflow. Overheating can cause Disc Read errors, as well. In addition, ensure that the power supply is unobstructed and uncovered. Much like the Xbox 360, the power supply can become quite hot and can cause errors if unventilated.
  • Check for disc tray errors. Depress the eject button and watch the tray extend. If the tray partially extends and then retracts immediately, you may have a problem with the DVD drive. If your Xbox is under warranty, this can be replaced at no charge. However, if you are out of warranty, you can install a new DVD drive on your own.
  • As a note, make sure that the new DVD drive comes with the same firmware as your original console, or you may experience additional error codes after the installation of the new DVD drive.

May 09, 2011 | Video Game Consoles

1 Answer

My PS3 stopped reading discs. It turns on but


Hi

This is a very common problem on the PS3. For a full workthrough on the causes and solutions of this see my FixYa Tip at this link.

http://www.fixya.com/support/r3582526-sony_ps3_not_reading_disks_or_games

Many thanks for using FixYa.

Dec 19, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

I only get disc read errors when i put disks in.


mate youve had it

it could be that the dust in the machine is causeing malfunctions or that the lazor that reads the disc is out of sinc

bin it and upgrade to ps3

you can still play most ps2 games

Nov 27, 2009 | Sony PlayStation 2 Slimline Console

1 Answer

Blueray disc update needed


When I tried to play a Blu-Ray Wall-E disc on my Sony DBP-S50, I got a message that I needed to update the java inside the player before it would play the menus and the movie. I think there might have been a website suggested on the screen before the disc stopped working, or it may have been on or in the dvd's box.

You will need to find the firmware upgrade online, follow its instructions to burn it onto a disc, and then run that disc in your bluray player to fix your problem.

I cannot tell you where to get the disc to upgrade your player, because you have not mentioned the brand and model of player you have, and this message is posted in the PlayStationPortable section of this website.

Hope that helps.

Oct 03, 2009 | Sony PlayStation Portable (PSP) Console

1 Answer

Playstation 2 won't play DVDs


if it's a fat PS2 and
model SCPH 30001, SCPH 35001
(not including the models with an 'R' after the model #.

these models need the following to play DVDs:
- PS2 DVD remote with IR unit
- PS2 DVD disc player (sold with DVD remote w/ IR unit)
- PS2 memory card

you copied the DVD disc to the memory card. you used the memory card to play DVDs.

later models didn't need the memory card to play DVDs.

hope this helps :D

Jul 16, 2009 | Sony PlayStation 2 (PS2) Console

2 Answers

Ps3 stop reading game


Hi,

see if the player tries to read the disc. Load a disc and listen.
Does the player make squealing noises or is it totally quiet? Squealing noises may indicate that the player is trying to synchronize with the disc but can't due to an obstruction on the lens or in the laser path inside the pickup or a defect in the pickup. This can also be caused by an intermittent signal problem due to a faulty ribbon cable.

Totally silent means that the photo sensor is not getting any usable input from the laser at all, meaning that the pickup is "blind" for lack of a better word.
This can be caused by an obstruction of the beam by foreign matter on the lens or inside the pickup all the way to a marginal or failed laser diode and/or photosensor array. This can also be caused by a bad ribbon cable with one or more severed traces.

You could try to clean the optics. This is the most common malfunction as far as i know in all disc players. It would involve taking the cover off and finding a way to expose the lense, and then cleaning it with a very gentle brush. some players have a cover for the lense that swings to the side during playing, this greatly reduces the chance of dust accumulating, but its still worth the try.

If you actually see dust on the lense, then its just that simple. clean, close, play.


It may also be worth your while to check on the small shafting that guides the carriage of the laser pickup. Dirt, grome, dust and solidified lubricant can cause stoppage of the carriage and the laser eye then fails to read the next track. Please refer to the image i have attached.

Also Make sure your box is not blowing really hot air and nothing is right behind it blocking it.. Turn it off for a few minutes and let it cool down and then give it a try playing the discs..
321b015.jpg

Jul 08, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Problems at reading discs


HI,

If you ps3 does not read any discs then:

see if the player tries to read the disc. Load a disc and listen.
Does the player make squealing noises or is it totally quiet? Squealing noises may indicate that the player is trying to synchronize with the disc but can't due to an obstruction on the lens or in the laser path inside the pickup or a defect in the pickup. This can also be caused by an intermittent signal problem due to a faulty ribbon cable.

Totally silent means that the photo sensor is not getting any usable input from the laser at all, meaning that the pickup is "blind" for lack of a better word.
This can be caused by an obstruction of the beam by foreign matter on the lens or inside the pickup all the way to a marginal or failed laser diode and/or photosensor array. This can also be caused by a bad ribbon cable with one or more severed traces.

You could try to clean the optics. This is the most common malfunction as far as i know in all disc players. It would involve taking the cover off and finding a way to expose the lense, and then cleaning it with a very gentle brush. some players have a cover for the lense that swings to the side during playing, this greatly reduces the chance of dust accumulating, but its still worth the try.

If you actually see dust on the lense, then its just that simple. clean, close, play.


It may also be worth your while to check on the small shafting that guides the carriage of the laser pickup. Dirt, grome, dust and solidified lubricant can cause stoppage of the carriage and the laser eye then fails to read the next track. Please refer to the image i have attached.

Also Make sure your box is not blowing really hot air and nothing is right behind it blocking it.. Turn it off for a few minutes and let it cool down and then give it a try playing the discs..

c0dab9c.jpg

Jul 03, 2009 | Sony PlayStation 2 Slimline Console

1 Answer

I cant read bluy ray discs. how do i fix. do i have to buy new ey


dear Friend
To read blue ray disc there must be a blue ray player. ordinary dvd writers or players cant read blueray disk.

Jul 01, 2009 | Sony Playstation 3 (PS3) Console

2 Answers

Ps3 does not read any of my games


see if the player tries to read the disc. Load a disc and listen.
Does the player make squealing noises or is it totally quiet? Squealing noises may indicate that the player is trying to synchronize with the disc but can't due to an obstruction on the lens or in the laser path inside the pickup or a defect in the pickup. This can also be caused by an intermittent signal problem due to a faulty ribbon cable.

Totally silent means that the photo sensor is not getting any usable input from the laser at all, meaning that the pickup is "blind" for lack of a better word.
This can be caused by an obstruction of the beam by foreign matter on the lens or inside the pickup all the way to a marginal or failed laser diode and/or photosensor array. This can also be caused by a bad ribbon cable with one or more severed traces.

You could try to clean the optics. This is the most common malfunction as far as i know in all disc players. It would involve taking the cover off and finding a way to expose the lense, and then cleaning it with a very gentle brush. some players have a cover for the lense that swings to the side during playing, this greatly reduces the chance of dust accumulating, but its still worth the try.

If you actually see dust on the lense, then its just that simple. clean, close, play.


It may also be worth your while to check on the small shafting that guides the carriage of the laser pickup. Dirt, grome, dust and solidified lubricant can cause stoppage of the carriage and the laser eye then fails to read the next track.see if the player tries to read the disc. Load a disc and listen.
Does the player make squealing noises or is it totally quiet? Squealing noises may indicate that the player is trying to synchronize with the disc but can't due to an obstruction on the lens or in the laser path inside the pickup or a defect in the pickup. This can also be caused by an intermittent signal problem due to a faulty ribbon cable.

Totally silent means that the photo sensor is not getting any usable input from the laser at all, meaning that the pickup is "blind" for lack of a better word.
This can be caused by an obstruction of the beam by foreign matter on the lens or inside the pickup all the way to a marginal or failed laser diode and/or photosensor array. This can also be caused by a bad ribbon cable with one or more severed traces.

You could try to clean the optics. This is the most common malfunction as far as i know in all disc players. It would involve taking the cover off and finding a way to expose the lense, and then cleaning it with a very gentle brush. some players have a cover for the lense that swings to the side during playing, this greatly reduces the chance of dust accumulating, but its still worth the try.

If you actually see dust on the lense, then its just that simple. clean, close, play.


It may also be worth your while to check on the small shafting that guides the carriage of the laser pickup. Dirt, grome, dust and solidified lubricant can cause stoppage of the carriage and the laser eye then fails to read the next track.

Feb 10, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

PS3 not reading discs


PS3 is The amazing device by sony but it has some common problems like Disc read error etc.... Good news is that these all problems can be repaired with the help of DIY Guides, one such guide available at PS3 Repair Blog

Aug 27, 2008 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles Experts

Iron
Iron

Level 3 Expert

3018 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

Marc
Marc

Level 2 Expert

68 Answers

Are you a Sony Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...