Question about 2wire 1800HG Router (RG1800HG00)
Hello, I am trying to froward the port to 1024 , but it does not work, I cannot see my camera via the internet. The camera is working well in my wireless home network. Any ideas?
Make wsure that that port 1024 is assigned to the ip address of the camera under port forwarding, you can also try changing the remote port, try 5000 and above, if it still does not work try DMZ.
you can always check if port 1024 is open on your router by performing a port scan through the net, you can get a free port scanner on this site..
for the process on doing fort forwarding on your 2wire router check this link.
Posted on May 07, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 12, 2013 | Linksys Wireless-G WRT54GL Router
Feb 11, 2011 | Linksys WRK54G Wireless Router
NOTE: The image may vary depending on the computer and modem you're using.
Connecting the Devices Together
After confirming the Internet connection through the modem, connect the modem to the Internet port of the router; connect the computer to any of the four Ethernet ports at the back of the router. For instructions, click here.
Checking the Router's LEDs
After connecting the devices together, check the lights on the front panel of the router. Ensure that the Internet light, as well as numbered light corresponding to the Ethernet port where the computer is connected, is lit. For further instructions, click here.
Setting Up a Linksys Router for Cable Internet Connection
Access the router's web-based setup page. For instructions, click here.
NOTE: If you are using a Mac computer to access the router's web-based setup page, click here.
On the Setup tab, click the MAC Address Clone sub-tab.
Select Enabled then click Clone My PC's MAC.
Click Save Settings.
Click the Status tab.
Check the Internet IP Address. If the Internet IP Address has numbers, this means the router has been properly configured. You should now be able to access the Internet. If you're still unable to access the Internet, powercycle the modem, the router and then restart the computer.
NOTE: If the IP address is still 0.0.0.0, click IP Address Release then, click IP Address Renew. If this does not change the IP Address, powercycle the modem, the router and then restart the computer.
Nov 14, 2010 | Linksys WRT54GX2 Wireless-G Broadband...
Jun 26, 2009 | Trendware TEW-432BRP Wireless Router...
Apr 12, 2009 | Linksys Wireless-G WRT54G Router
Nov 21, 2008 | 2wire 2700HG-B Router (2700HGB)
Oct 31, 2008 | Zyxel ZyAIR G-4100 Wireless Router...
May 14, 2008 | Linksys Wireless-G WRT54GL Router
640 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: