Question about Pinnacle Breakout Box & Drivers for DV500-DVD (210100180)

Open Question

Installing DV500 driver into XP windows

Had to install new motherboard therefore reinstall Premier and then Pinnacle 500 board them install Pinnacle DV500 DV V. 4.02. All ok until driver installation when windows no like driver without windosw testing certification. I continue anyway. But on reboot windows will not complete load up unless I go back to a previous configuration? On previous motherboard using Windows XP pro I had no trouble. Advice please ... cheers
Michael

Posted by on

  • Anonymous Mar 07, 2009

    dito

  • halogenius Mar 10, 2009

    same thing!

×

1 Suggested Answer

ginko
  • 19396 Answers

SOURCE: Had to install new motherboard

The problem is not the Microsoft certification. The certification request is prompted only before installation. Its only effect is allowing or denying the drivers installation.

Pinnacle website has two different driver versions. Try both versions. If that does not work there is usually a conflict in allocation of system resources.

Here the links.

03/22/2005
DV500_45_webinstaller.zip -



04/15/2002
dv500_401_free_webinstall.exe

Posted on Jan 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Win 7 DV500 DVD Pinnacle Drivers


It is a long gone product that is unsupported by Pinnacle. I DID happen to find a German site that still had the DVD Driver disc available for download though! Give it a go. It appears to be in 3 parts.
ftp://ftp.pinnaclesys.de/driver/pc/DV500/DV50045.htm

Mar 26, 2014 | ViewCast Osprey 210 Video Capture

1 Answer

I want work with dv500 pinacle in a windows 7 instal . Its possible?


Pinnacle DV500 is supported by drivers up to windows XP only. You can download the driver at this link :http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Advanced+Video/DV500+series/DV500+Series+Support/Download+Area/Drivers+-+Updates/DV500_45_webinstaller_zip.htm?mode=documents&Display=1
You can try installing the Win XP driver and see if this will run on Windows 7. If not, then your other choice is to run it using Windows XP mode on Windows Virtual PC.
The link below explains what Virtual PC and XP mode is. You can also download the installers there.
http://www.microsoft.com/windows/virtual-pc/

Mar 15, 2011 | Pinnacle DV500 DVD Video Capture Graphic...

1 Answer

Drivers for Pinnacle DV 500 DVD under Windows 7???


This is an outdated product and no longer supported by Pinnacle. Old drivers are still available. Click here and here to view them. Or click here for a complete list of archived products.

Note that the drivers may or may not work with Win 7 and no one other that Pinnacle can provide appropriate drivers. For the software you can try the Compatibility mode.

Oct 04, 2010 | Pinnacle Breakout Box & Drivers for...

1 Answer

Why you nshould instal drivers after formating and installing windows xp


After installing Windows XP you will find the motherboard device drivers such as video, audio, modem, LAN etc are not installed and therefore these are not functioning.

You can download the motherboard drivers from Intel WEB site. Select your model motherboard/device, and make sure you select the Windows XP version of the drivers that matches your Windows operating system.
Please click on this link and select your model motherboard : -
http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

Sep 05, 2010 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

2 Answers

I cannot install audio driver into my computer (DG31GL Board)


I am using a computer with DG31GL board, after installing vista, i reinstalled Windows Xp into my system after removing Vista from my system. Now my system is not taking the audio driver. I tried a lot. I am getting an error message that the installation failed. Please help me

Jun 08, 2009 | Computers & Internet

3 Answers

I have Pinnacle dv500 plus card and want to use it with XP. would u plz send me a link where I can download the driver for win XP?


You can get the drivers for Windows XP here: http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Advanced+Video/DV500+series/DV500+Series+Support/Download+Area/Drivers+-+Updates?mode=documents
It's the 4.5 version you need for Windows XP - and don't forget to install the PCI Performance enhancer if you don't want the video and audio to be asynchronous.
Greetz,
Mainframe

Apr 16, 2009 | Pinnacle Breakout Box & Drivers for...

1 Answer

DV 500 Plus


I know what card this is now.

When Avid Corp took over Pinnacle a few years ago, this product seem to disappear. In fact they were begging me for awhile to get one. I almost did too.

I wonder if service pack 2 or 3 messed this thing up? I've seen some complaints on here that are similar to what your experiencing.

There are some new analog capture they have out there now that work with digital a lot better than they did a few years ago.

There is something realy proprietary they did to that thing that can make a mess of things..

Aug 16, 2008 | Pinnacle Breakout Box & Drivers for...

1 Answer

Pinnacle DV500 plus


I could send you a copy of my installation CD. Contact me under rangerx@gmx.net.

Jun 08, 2008 | Pinnacle Breakout Box & Drivers for...

Not finding what you are looking for?
Pinnacle Breakout Box & Drivers for DV500-DVD (210100180) Logo

Related Topics:

2,132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pinnacle Televison & Video Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

778 Answers

Willem.
Willem.

Level 2 Expert

354 Answers

Are you a Pinnacle Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...