Epson printer r300 error code 'needs servicing'. This, presumably, is printer speak for send it to the manufacturers for servicing and then get charged and arm & a leg to get the printer running again!
Is there any procedure to get round this?
Is the waste pad full ?
If the waste pad is actually full and ink is about to overflow, then you need to install a waste container. You can see the waste pad by opening the access panel on the back of the printer.
1)Press and hold “Stop”, “Maintenance”, and “Power” buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don’t have a screen so just wait until the 10 seconds is up.
2)Turn the printer off, unplug the power cord. Wait about 1 minute and power the printer back up. The counter will be reset. That’s all there is to the reset procedure.
I’m happy to help further over the phone at https://www.6ya.com/expert/ron_9356d26241d4cbf7
Testimonial: "fast, efficient and it worked first time. Big Thanks"
155 views
Usually answered in minutes!
×