Question about JVC RX-D205 7.1 Channels Receiver

1 Answer

Auto muting on when on am/fm and no sounds come out. everything else is fine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,546 Answers

That's normal.

The Auto Muting mode mutes the audio output of the tuner if the station is not sufficciently strong to be accurately tuned. Otherwise you would hear all that interstation hash noise.

Press the FM Mode button to change it to Mono if you want to manually tune a hard-to-reach station. It will be in Mono.

Page 26:

AUTO MUTING
Normally select this.
When a program is broadcast in stereo, you will hear stereo sound; when in monaural, you will hear monaural sound.
This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

Posted on Mar 31, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: No sound in FM radio

I had same problom and fixed by connecting an antenna to fm port

Posted on Jan 07, 2009

  • 1 Answer

SOURCE: JVC receiver Auto muting?

I had the same problem. I had bad antennae connection. I re-did the antennae conection and it fixed it. HOpe this will work for you...

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Jvc car radio won't mute on incoming calls


I think the only hope you may have is the radio has an auto signal select in the menu somewhere. You can't use the mute wire as that will mute the AUX as well.

Dec 08, 2013 | JVC Ks-bta100 Bluetooth Adapter For Select...

1 Answer

Receiver comes on but have no sound tried the solution; but it still didn't work. What I am seeing is, in the upper left hand corner of the window in small writing says "mute auto" which is...


Mute Auto is for FM only. It mutes interstation hiss while tuning. Look for some other indicator that might reveal why the signal path is failing. Tape?

Have you tried the basics? Speaker test? FM only?

Sep 01, 2011 | JVC RX-554V Receiver

1 Answer

When i put the fm radio it display auto muting and doesnt have sound, this only happens with the radio because the dvd sounds ok


"Auto Muting" in the context of FM means the output will be muted if the signal is so weak it would result in mostly noise anyway. Interstation radio noise can be annoying and dangerous at high volumes.

Aug 14, 2011 | JVC TH-M303 System

1 Answer

I tried restoring the sound by pressing Muting on master volume. Auto Muting still appears on the display and I can't restore the sound.


"Auto Muting" is for FM reception only and means it will mute the FM audio unless the signal is strong enough to provide decent audio.

Re-evaluate your symptom and corrective actions for relevancy.

Manual / Troubleshooting Page 31:

http://www.retrevo.com/support/JVC-RX-6000VBKJ-Receivers-manual/id/315bh050/t/2/

Dec 27, 2010 | JVC RX-6000V Receiver

1 Answer

Everything works fine on the unit no problem until


3. If your Nuvi has a FM transmitter, is it selected to "FM" or "Speaker"? The "FM" setting will mute the internal speaker. Setting it to "Speaker" will send sound to the speaker.

if this side of it works then the FM transmitter is faulty

Check that the sound has not been MUTED

plug the earphone into the socket to see if any sound is heard. The socket is also a switch that takes sound from internal speaker to ephone and reverse.
If no sound is hear in either FM or normal mode your unit is faulty and needs repair

Jul 24, 2009 | Garmin nuvi 250W GPS Receiver

1 Answer

No sound on coming out of speakers and theres no wires touching everything looks like it works fine


Make sure you didn't accidentally hit the mute button.
You should always test sound with a CD, testing sound via AM/FM will produce interference and almost no sound when between stations, also don't to forget to connect the antenna lead.

Check that the speakers are wired correctly.
Check that the sound controls are adjusted properly, i.e. Balance, Fade etc.

Good luck...

Feb 24, 2009 | JVC KD-G210 CD Player

1 Answer

No sound in FM radio


I had same problom and fixed by connecting an antenna to fm port

Jul 05, 2008 | JVC RX-6030V Receiver

1 Answer

No Sound for AM/FM Radio


Ensure that the antenna is still attached. It will auto-mute if no signal is attainable.

Sep 12, 2007 | Onkyo DR-C500 Multi-disc DVD Player

2 Answers

JVC receiver Auto muting?


I had the same problem. I had bad antennae connection. I re-did the antennae conection and it fixed it. HOpe this will work for you...

Dec 03, 2006 | JVC RX-618V Receiver

Not finding what you are looking for?
JVC RX-D205 7.1 Channels Receiver Logo

1,053 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

stynger007

Level 1 Expert

33 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...