Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer

2 Answers

Bosch Nexxt WFMC3200UC

Water pouring out from beneath washer. No leaks from drain hose or water connectors.No previous problems. Checked cleanout in front, and it appeared to be tight w/ no discernible leakage

Posted by on

  • 1 more comment 
  • dfdavid4 Jun 29, 2008

    Our Bosch Nexxt 100 washer is leaking water at the front and left side when it spins. It isn't the full washer load but still a problem. We had a repair person out when the machine wouldn't spin - he found our cleanout was clogged - and now it is leaking.

  • Anonymous Mar 19, 2014

    water is coming from a vent hole underneath the basin. It only leaks when the water is slow to drain or plugged. The higher the water level in the sink the more leakage underneath(it pours out) if I close the drian plug it stops..cant figure this t..Help!

  • Anonymous Mar 22, 2014

    water leaking appears coming from front already cleaned out access in front

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 744 Answers

Bosch Nexxt WFMC3200UC Water pouring out from beneath washer. This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Posted on Aug 05, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

Is the machine washing
or just filling up with water
or leaking on wash cycle

Posted on Mar 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer is leaking


What is the model number of the unit?

Nov 14, 2012 | Kenmore HE2 Plus Front Load Washer

1 Answer

There is a massive leak coming from beneath my ingine. I never have had a problem in the past. The water rapidly drips but nearly pours out, leaving a fishy odor. I looked beneath where the water is c


could be a water pump,or a hose clamp is loose on bottom radiator hose.You will have to follow leak to find problem.You can take to Midas and tell them to check exhaust and they will raise up and see your leak and show you where it's coming from.

Aug 19, 2012 | 1992 Lincoln Town Car

2 Answers

Water has started pouring out from under my washer


Hello, you've indicated this problem only arrises during the rinse cycle, is that correct ? The leak doesn't occur during the wash cycle initial fill level ? I want to distinguish the difference because there has been a repair tip issued by whirlpool for the duet and sport washer's. This may be applicable to your machine. If it is indeed only during the rinse, the problem is within the door assembly. Specifically the glass and it's "seat" to the frame. Let me know, I'll watch for your reply. macmarkus :)

Mar 14, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Leak at the bottom of front door


Hi,

Leaking water usually comes from hoses or connections. Be sure that water appearing to be a leak isn't drain water from a backed-up standpipe (see HERE for information on clearing clogged drains).

NOTE: To prevent serious flood damage that can occur if washing machine supply hoses burst, be sure to install "no-burst" stainless-steel mesh hoses and lever-type shutoff valves, as shown in the illustration. With these, you can easily turn off the levers for both hot and cold water between wash days.

1) Check the fittings where hoses connect to the faucets and to the back of the washing machine. Also look for worn or leaky hoses. Tighten couplings or hose clamps if necessary, or replace hoses altogether (be sure to turn the water off before removing hoses and drain them into a bucket after disconnecting them).

2) Determine whether machine is over-sudsing during wash loads-- this can cause the entire washing machine to overflow. Reduce suds by pouring a mixture of 1/2 cup of white vinegar and 1 quart water into the washer. Then switch to less detergent or use a low-sudsing variety.

3) Call a repairperson. The machine may have a faulty basket gasket or tub seal and bearing that must be replaced

Please rate this solution
RNJ VINODKUMAR

Oct 03, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet Won't drain


You can measure the voltage going to the pump in the spin cycle. If the voltage is there and the pump is not running you have your problem. Get some pinch off pliers and clamp off the hose going to the pump from the tub and you only have to deal with the water in the drain hose and pump when you pull the cleanout catcher to see if it is just plugged with something.
Eric

Jun 24, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Leaking


The leaks in a washing machine could be coming from many different places in the washer.

The first place you need to check is behind the washer, check the two fill hoses and the water mixing valve.

The next thing to do is to remove the front panel, set the washer on the regular cycle and turn it on to start filling.

Use a drop light and check all the hoses under the washer as the washer is filling. Make sure to keep your hands away from any moving parts.

If the hoses are ok, check the pump for leaks. When the bearings in the pump wear out, that is when the pump will get noisy and that could cause your Maytag top load washing machine water leaks.

Another place that the washer could leak water from, is the stem & seal on the holding tank. When washer leaks water from the stem & seal, the water leaks down the center of the transmission.

When the stem & seal need to be replace, the tub bearing has to be replace at the same time. This is an expensive repair if you have to pay someone to do it. If you do it yourself it will cost you about $110

Aug 21, 2008 | Miele Novotronic Premier 500 Front Load...

2 Answers

Miele leak when switched on for wash, from filter unit front LHS bottom of machince


The leaks in a washing machine could be coming from many different places in the washer.

The first place you need to check is behind the washer, check the two fill hoses and the water mixing valve.

The next thing to do is to remove the front panel, set the washer on the regular cycle and turn it on to start filling.

Use a drop light and check all the hoses under the washer as the washer is filling. Make sure to keep your hands away from any moving parts.

If the hoses are ok, check the pump for leaks. When the bearings in the pump wear out, that is when the pump will get noisy and that could cause your Maytag top load washing machine water leaks.

Another place that the washer could leak water from, is the stem & seal on the holding tank. When washer leaks water from the stem & seal, the water leaks down the center of the transmission.

When the stem & seal need to be replace, the tub bearing has to be replace at the same time. This is an expensive repair if you have to pay someone to do it. If you do it yourself it will cost you about $110

Aug 06, 2008 | Miele Novotronic Premier 500 Front Load...

2 Answers

Water Leaks from beneath my washing machine


Our WM2077CW just started the water leaking from underneath. We unplugged the electrical cord and disconnected the hoses (water, drain). We then removed the inspection plate from the back and checked for wet hoses. The big black hose on the bottom was a little wet. On careful examination we found a small hole that looked like a material fatigue failure at the point where the accordion part of the hose met with the solid part of the hose near the main drum connection. I suspect this is may occur in other LG washers of the same design. Unless your floor is perfectly level it's hard to tell whether coming from the left or right side really indicates where underneath the water is coming from.

Nov 26, 2007 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
Bosch Nexxt Premium WFMC6400UC Front Load Washer Logo

1,136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...