Question about Canon PIXMA MP130 All-In-One InkJet Printer

1 Answer

Ink waste absorber is full, what do i do!!! - Canon PIXMA MP130 All-In-One InkJet Printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

1. To clean physical pads:
Open cover (as if replacing ink cartridge).
Locate waste ink pads, they are far right under cartridge slider.
Pry up waste ink pads (inky, might want to wear gloves).
Rinse pads in sink or with alcohol, dry.
Replace pads. Make sure pads are fully seated.

2. To reset waste ink counter:
Press Menu-Scan-Copy-Scan to enter service menu.
Use arrow keys to scroll to “Service menu counter access”.
Press OK.
Use arrow keys to scroll to “ABS-M DOT COUNT”
Press Copy.
Use arrow keys to reset count to zero.
Press OK.
Press Stop/Reset.

Posted on Mar 15, 2008

6 Suggested Answers

pineworks
  • 4041 Answers

SOURCE: Ink wast absorber almost full

Hi there
There no easy way the printers are been made this way so you take them to the shop, but if you are handy with your hands and know what you are doing then you will need to take all apart and take out the ink pads inside the printer and clean them up make sure they nice dry when put back in, then you are going to need a program that you can find on the internet it will be called waste reset tools, or your printer will not work even after you done the clean out.

I have got canon MP-Tools on my website if this is the one you need.
with this you can reset the waste ink tank before you do the clean out but remember in time you will need to clean out or it going to be a big mess of ink coming out your printer.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time

Posted on May 02, 2010

Testimonial: "I took my Printer into a shop but I think he's in over his head on this one. I'll get him to connect to your site. Thank for the heads up. Jim T"

IB4G2008
  • 3587 Answers

SOURCE: ink waste absorber

sure...it's under the back cover, with a small thin cover to remove it..

Posted on Mar 10, 2008

SOURCE: how to reset waste ink absorber full ip3300 warning?

I have the same problem, but Jet Tec waste inks. When I first replaced black (pgi 5bk)-don't forget to place the small chip from the original cartridge to replacement; it worked fine. But now, it has a lot of problems because this **** printer from canon only want original inks (and the original are tooooooooo expensive). I'll never bought anything else from canon.

Posted on Mar 23, 2008

  • 1 Answer

SOURCE: Waste ink absorber

where can i buy canon waste ink absorber?

Posted on Oct 28, 2008

  • 1 Answer

SOURCE: E27 Waste ink absorber full

canon mm140 E27 = Waste ink absorber full or platen waste ink absorber full what would be made to solve this problem

Posted on Dec 21, 2008

pineworks
  • 4041 Answers

SOURCE: Canon pixma 150 waste ink absorber full

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

But some time when you get the chance do clean the waste tank out.
 

  1. Start with printer off

  2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on

  3. While holding the Power button, release the Resume Button.

  4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.

  5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).

  6. Turn off the printer and turn on again

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ink absober is full


Eight flashes: Waste ink absorber almost full

The printer has a built-in waste ink absorber for the ink used during Print Head cleaning. Eight flashes indicates that the waste ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink absorber becomes completely full, contact a Canon service representative.

Important

Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing will no longer be possible

Jan 11, 2011 | Casio Printers & Copiers

1 Answer

How to solve the problem of "Waste ink absorber is full", then show "check printer" & "5800" after continuing to use it for Canon MP150 Printer?


Use this method with your own risk!!

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

Reset E27 Waste ink absorber full or platen waste ink absorber full for Mp170

firstly download MPTOOL
Download here
Download manual guide how to use MPtool
download here

OK hope this can help

Jul 12, 2010 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Ink waste absorber is nearly full. What do I do?


You need to reset it.

Use this method with your own risk!!
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

Reset E27 Waste ink absorber full or platen waste ink absorber full

You need Mptool to reset your mp170
download mptool here

Manual guide to use mptool
download manual guide here

Jul 09, 2010 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Full ink absorber


It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

Jan 02, 2010 | Canon PIXMA iP90 Mobile Printer

1 Answer

Absorber tank is full


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Dec 01, 2009 | Canon Printers & Copiers

1 Answer

Triangle and ON/OFF switch both flashing. Window reads 'CHECK PRINTER'. What exactly do I check? Window had been reading 'WASTE INK NEARLY FULL' for a fortnight, but I couldn't find out how to deal with...


The waste ink absorber is getting full.
Press the OK button to clear the error.
Printing can be done until the waste ink absorber becomes full. If the waste ink absorber becomes full, please contact your local Service Center for replacement of the absorber and machine maintenance.

The waste ink absorber is a part inside the machine, which absorbs ink used in the cleaning operations, etc. http://support-nz.canon.co.nz/contents/NZ/EN/8000137103.html

Nov 09, 2009 | Canon PIXMA MP170 All-In-One InkJet...

2 Answers

ERROR E 2 comes up on the little lcd screen when i try to print now.


www.fixyourownprinter.com

ERROR CODE CANNON MP150/MP160

E2 - No paper (ASF)
E3 - Paper jam
E4 - No ink
E5 - The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly
E8 - Waste ink absorber full, or platen waste ink absorber full «ОК»)
E9 - The connected digital camera / video camera does not support Camera Direct Printing
E14 - The Ink cartridges whose destination are wrong
E15 - Ink cartridge is not installed
E16 - Ink remaining is unknown
E19 - Failed to scan head alignment sheet
E22 - Carriage error
E23 - Paper feed error
E24 - Purge unit error
E25 - ASF(cam) sensor error
E26 - Internal temperature rise error
E27 - Waste ink absorber full or platen waste ink absorber full
E28 - Ink cartridge temperature rise error -
E29 - EEPROM error
E33 - Paper feed position error
E35 - USB Host VBUD over current error - USB
E37 - Abnormal motor driver error
E40 - Other hardware error
E42 - Scanner error

Oct 26, 2009 | Canon PIXMA MP160 All-In-One Printer

2 Answers

Ink waste absorber


Waste absorber is full. Where is the waste ink absorber and how do I empty it?

Apr 08, 2009 | Canon PIXMA iP1600 Printer

2 Answers

E27 Waste ink absorber full or platen waste ink absorber full


canon mm140 E27 = Waste ink absorber full or platen waste ink absorber full what would be made to solve this problem

Dec 06, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

1,876 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...