Question about RCA RCR450 Remote Control
Hold the tv botton and power botton at the same time when light starts flashing push power botton off the push stop the turn it back on
Posted on May 01, 2009
First try this method as it is the quickest way,
To program a component using the Automatic Code Search method, perform the following steps:
1. Turn on the component you want the remote control to operate. 2. Press and release the component button that corresponds to the component you want the remote control to operate. The illuminated ON-OFF button turns on and remains on.
3. Press and hold both the component and ON-OFF buttons. The illuminated ON-OFF button turns off. 4. After the illuminated ON-OFF button turns back on, release both buttons. The illuminated ON-OFF button remains on. If you press an invalid button during Auto Code Search, the illuminated ON-OFF button blinks four times and turns off. The last programmed code under that component button is retained. 5. Press and release the PLAY button.
6. If, after five seconds, the component does not respond, continue to press the PLAY button every five seconds until the component turns oCode Search - info.gif Each time the PLAY button is pressed, the illuminated ON-OFF button blinks ten times while a block of 10 codes is sent to your component. This process continues until all of the codes in the Code Lists have been searched. If the component has not turned off after all codes have been searched, the illuminated ON-OFF button blinks four times, turns off, and the Auto Code Search Entry method is exited. 7. When the component turns off, press and release the REVERSE button, then wait two seconds to see if the componentCode Search - info.gifn again. If the component does not respond, continue to press the REVERSE button every two seconds until the component turns on again. This will isolate the correct code in the last block of codes sent. Each time the REVERSE button is pressed, the illuminated ON-OFF If the REVERSE button is accidentally pressed after the component responds, press and release the FORWARD button. Wait two seconds to see if the component turns off again. 8. To save the new code, when the illuminated ON-OFF button turns off,Code Search - aud_remote_stop.gifthe STOP button.
If some of the features of your component do not work, different codes in the list can be tried until you find the code that allows the remote to control the majority of your component’s functions.
Only use the codes below if the auto code search dosen't work. Codes program a zenith tv are below
Zenith 1000, 1001, 1004, 1051, 1083, 1151, 1152,
You can click the link below you will be able download the manual.
Posted on Mar 15, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 26, 2016 | Zenith Televison & Video
Nov 15, 2016 | Zenith Televison & Video
Nov 14, 2016 | RCA Televison & Video
Sep 12, 2015 | Zenith 3-Device Universal Remote Easy To...
Aug 22, 2015 | Zenith Televison & Video
Feb 25, 2015 | Zenith Televison & Video
Feb 10, 2010 | Televison & Video
Mar 09, 2008 | Zenith C27A24T 27" TV
Jan 21, 2008 | RCA RCU600M Remote Control
283 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: