MY FLASHED MOTOROLLA Q9M

Please leave the user name box blank and type in admin for the password. I hope this helps and thank you.

These phones can be fully flashed if they are CDMA (no sim card) however on these phones the flash is very unstaible. You are much better off purchasing a new cricket phone, as you are guarenteed all of the features.

If you really want this phone flashed then you should look for an authorized cricket dealer or a store that flashes phones. Corporate locations (Full Service) do not flash phones.

To get the internet to work on your phone you have to go into the CDMA programming menu... press the call button then ##000000 then enter.

Scroll all the way down to where it has SIP user id and SIP password, in the password field enter cricket

Now save your info (press menu button, then save) and wait for the reboot.

It should be working now.

Try using {your phone number}@mycricket.com for the user name and for the password enter: cricket

Example:
user name: [email protected]
password: cricket

Make sure you use lower case letters for the password

Please contact Dell

You need to have your cell phone carrier set it up for you, their tech support is where you need to go. I had sprint in the past and you have to go into a screen to input info. They can help you.

google your phone model. It is under the battery. When you google the maunal it shood come up

the password is "cricket" try it it works!

my cellphone is already flashed and in use, but i cant use the internet i i ready try everything what can i do??

please confirm if the router is a 6104K, or a KP or Wg or another model as the K and KP are not wireless, a "W" will denote wireless capability...

Not all manuals are available for download from the Edimax website but heres a start...

Connect the router to your PC with a cable... leave the modem disconnected to start with

open internet explorer and type in enter the default IP address 192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>

This should bring up a user/password dialog box. By default the user name is "admin" and the password is "1234".

Confirm you are getting this far and we'll go the next steps