Question about Linksys BEFW11S4 802.11b Wireless Router/Switch + WMP11 PCI Card (BEFW11S4 + WMP11)

1 Answer

Already tried it..

Hi
i've tried it.. but it's not work, it's still the same.. my pc got into internet without input password. and i still can't link to linksys homepage. do you know other way to seccure my network? by the way, what's your name? my name's Nak, i'm 19years old from Cambodia. but now i live in Beaverton..
thanks.. :)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 49 Answers

I can't tell if you tried turning off wireless, HARD WIRING your lap top to YOUR linksys. Did you.

Another way to see if you've done it right, it to turn off your Brother's linksys to see if you can still get onto the internet.

Also are there OTHER wireless routers in the neighborhood? It doesn't sound like you8're communicating with YOU router.

Posted on Mar 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I tried to change my password and i closed the page before it finished and when i tried to connect to the internet it wont work help


Perform a reset. Find the hidden reset button, usually close to power line, find a small hole with a little button behind it. Use a toopick or similar to hold down power button for at least 10 seconds. This should restore it to factory setting and default password. Google the model # and brand and "default password" if you don't already know it. If this does not work to reset it, then try this...
Hold down reset button for 30 seconds, still holding button pull the power out, keep holding button for 30 secs, STILL holding button - plug in power then release button after 10 secs.
Yes 30 secs each cycle is overkill, but allows to be sure.

Aug 11, 2013 | Computers & Internet

2 Answers

Hello sir i am facing a problem in a Dlink 1016d how to connection to netgear through a LAN connection


use the LAN port at the back of your PC and connect using a patch cable (cat 5 or 6 cable)

Sep 01, 2011 | D-Link DES 1005 Ethernet Switch

1 Answer

How to setup my tl-sf1008d in my computer with other computer to play lan games with no internet..


ASALAM

CONNECT BOTH PC WITH CROSSOVER WIRE OR MORE THEN TWO PCS THEN ADD SWITCH LIKE TPLINK WITH STRAIGHT WIRE

LOOPBACK ADOPTER SHOWS LOGICAL CONNECTIVITY BETWEEN DIFFERENT COMPUTERTS WITHOUT INERNET

ON 1ST COMPUTER DO THE FOLLOWING !!
GOTO CONTROL PANEL
> ADD HARDWARE
>YES I ALREADY CONNECTED
>ADD A NEW HARDWARE(FOUND AT THE END)
>I MANUALLY SELECT FROM THE LIST
>NETWORK ADOPTER (CLICK NEXT)
>MICROSOFT
>MICROSOFT LOOPBACK ADOPTER
>GO TO NETWORK CONNECTION LOCATED IN CONTROL
>ASSIGN IP RANGE TO LOOPBACK ADOPTER
LIKE
IP 192.168.1.2
SUBNET 255.255.255.0
DEFAULT GATEWAY 192.168.1.1
DNS 192.168.1.1

ON THE SECOND COMPUTER PERFORM THESE STEPS
BUT WITH DIFFERENT IP LIKE SAME RANG 192.168.1.3
AND PING THE 1ST COMPUTER FROM THE SECOND
LIKE
ping 192.168.1.2 -t
TYPE THE FOLLOWING COMMAND IN RUN.

>IF YOU RECEIVE REPLY IT MEANS BOTH PC ARE CONNECTED TO EACH OTHER LOGICALLY.
>IF RECEIVE TIME OUT MEANS SOMETHING IS WRONG.

>PERFORM THIS STEP AGAIN FROM 1ST COMPUTER.

YOUR FILE SHARING AND GAMES START WORKING WITH NO INTERNET.
TO ACCESS FILES SHARING FROM PC2
TYPE THE FOLLOWING COMMAND IN RUN
\\192.168.1.3

REGARDS
MASSAM
WWW.BESTFASHIONSTYLE.NET

Mar 28, 2011 | TP-LINK TL-SF1008D 8-Port Ethernet Switch

1 Answer

How to first time d link connection and broadband for 2 PC. setup information pl.


Here is what you need to do.
1. Prepare the modem provided to you by your internet service provider. If you are wired broadband subsidiary......connect the phone line to the modem (if a splitter is attached make sure that modem labeled out is connected to the modem line input).
2. Now connect modem and d-link. Using a lan cable from the modem connect it to wan port of the d-link.
3. Connect the two pc's using another lan cable from the lan card at the back of your pc to the lan ports of the d-link.
That's the setup.

Try to turn all devices and the pcs and see if that connects.

If you are planning on accessing the ip configuration of the dlink, type in the address bar of your internet browser 192.168.0.1... default username is "user" leave password blank.

Should you have anymore queries, just post back.
Thanks
Mace

Dec 12, 2010 | D-Link DES-1008D 8-Port Ethernet Switch...

3 Answers

D-link cant accesed internet 4pc


Most of DSL modems are connected to PC with USB cable...
n if ur server is connected with other pc on lan .. you can use internet sharing option available in winxp.

Following are the steps to enable Internetsharing for other pcs.


How to use Internet Connection Sharing loadTOCNode(2, 'summary'); To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer loadTOCNode(3, 'summary'); On the host computer, follow these steps to share the Internet connection:
  1. Log on to the host computer as Administrator or as Owner.
  2. Click Start, and then click Control Panel.
  3. Click Network and Internet Connections.
  4. Click Network Connections.
  5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
  6. Click Properties.
  7. Click the Advanced tab.
  8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
  9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
  10. Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
    address 192.168.0.1. Your computer may lose connectivity with other computers on
    your network. If these other computers have static IP addresses, it is a good idea to set them
    to obtain their IP addresses automatically. Are you sure you want to enable Internet
    Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

let me know if it helps.

best regards,



Nov 03, 2008 | D-Link DGS-1008D 8-Port Gigabit Ethernet...

1 Answer

To configure this switch


not instal dlink driver, problem for interner connection

Aug 24, 2008 | D-Link DES-1008D 8-Port Ethernet Switch...

2 Answers

LAN problem


hi!good pm...hope this will help...

sometimes it depends on the speed of the pc or on your internet service provider or in the hub itself...try to read the specs of your hub and see how it works if it has a multiple connection...

goodluck!

Feb 01, 2008 | Computers & Internet

3 Answers

Home networking


You need to go to control panel>network set up wizard on the pc which has the internet connection and when you go through the wizard amongst prompts select, allow other computers to connect through this computer and then finish off the wizard. On the other computer you do the same but, on this one select this computer connects via another computer on the network and again finish off the wizard.

Oct 02, 2007 | Acer ALW 3016 Networking Switch

Not finding what you are looking for?
Linksys BEFW11S4 802.11b Wireless Router/Switch + WMP11 PCI Card (BEFW11S4 + WMP11) Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...