Question about Vivitar ViviCam 5150s Digital Camera

1 Answer

Language Set up

We have had this camera for at least 2 years with no problems. All of a sudden the screen instructions are now in what appears to be Chinese. I can only assume that someone has been playing around with it in my absence. However I am at a loss to figure out how to get this back to the English version. The instruction leaflet is very brief and does not give this information.

Any Assistance would be appreciated.

Regards

Debbie Falla
HR Officer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

Hi Debbie,
See if this works with your camera. Go to Page 5 in the menu (5/5) Scroll down to the 4rth setting and select it. Choose one of the other options, one of them should bring up English. Try the same sets again selecting a different choice each time until you get English.
Good luck.

Posted on Mar 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an older model Vivicam 8400 with 8.0 mega pixel and 3x optical zoom. My daughter has somehow set the operating language to German and I need to know how to set it back to English. Please help?


see page 39 of
Vivitar ViviCam 8400 Owner Manual


1. Press the Down button to select the Language option.
2. Press the Right button for the 9 Language options submenu to appear: English ,French,German ,Spanish,Italian ,Portuguese ,Dutch ,Turkish ,Russian.
3. Press the Up/Down button to highlight and select the Language option you desir e.
4. Press the OK/Menu button to confirm and save your choice.
5. The camera`s operation language is now set to the one you selected.
6. Press the OK/Menu button to exit

Aug 28, 2016 | Vivitar Vivicam 8400 8.0 Mp Digital Camera...

1 Answer

How To Change My Sony Camera Model No.Nex-3N Menu


These instructions will just change an English language NEX-3N that has the instructions set to Japanese. They may not work on a Japanese model of the NEX-3N.

Find the Menu screen by pressing the MENU button on the camera.
Select the SETUP icon (This looks like a case) in the bottom right of the screen.
The Language setting is a long way down the SETUP MENU but it is the only setting that has an icon.
The icon looks like a book with a capital A on it. [A]
These instructions are on or about page 56 of the NEX-3N instruction manual.

Oct 21, 2014 | Cameras

1 Answer

The language on my Canon EOS 5D Mark II is all in Japanese. Is there any way to change it to English? Thanks


Follow the correct instructions below based on the diagram to change the language of Canon EOS 5D Mark II from Japanese to English;
tinualbinale_31.png
1.Press the MENU button.Different tabs are displayed on top of the screen as shown below.
tinualbinale_34.png

2.Turn the Main Dial to select the tinualbinale_33.png Setup Tab ( The one with two dots and a spanner) on top of the screen.
3.Under this tab Turn the Quick Control Dial to select [Language] ( the third item from the top ) and press the SET button.
tinualbinale_35.png
4.To select the desired language use Main Dial or Quick Control Dial (The current setting is indicated in Blue) and Press the SET button.
5.The desired language is set.

Thanks for choosing Fixya

Jun 20, 2011 | Canon EOS 5D Mark II Digital Camera

1 Answer

My sony camera is from japan the language of that is japanese so that my problem is, I never know how to change in english language.


Hi, http://www.docs.sony.com/release/DSCW200.pdf Is the instructional manual for that camera. You need to get into the menu then from there go to the bottom which would be settings, then go to the bottom of that screen which will be languages and then you should be able to set it to english.

May 12, 2011 | Sony Cyber-shot DSC-W200 Digital Camera

1 Answer

How do I reset the printer to the english language panel display


Follow these steps to change language setting on the printer display :
1.On the printer control panel, press the Left arrow twice or the Right arrow seventeen times on the Menu button until SELECT LANGUAGE? appears on the printer display screen.

NOTE: If the language is currently set to a language other than English, the Select Language? menu option will appear in that language.

2.Press the OK button.
3.Press the Left or Right arrows on the Select Photos button until your desired language appears.

NOTE: Even if the printer is currently set to another language, the name English will appear in the English language.

3.Press the OK button to select the language. A message requesting confirmation of the selection will appear appears. If the correct language is displayed, press the OK button. If the incorrect language appears, press the CANCEL button and start the selection process again.
4.When the SELECT COUNTRY/REGION? setting appears on the printer display screen press the OK button to continue.
5.Press the Left or Right arrows on the Menu button until the desired country/region appears on the printer display screen.
6.Press the OK button to select the country/region.

Nov 07, 2010 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Rebel XS was working fine... yesterday, all of a sudden, the LCD screen went blank and it displays 'busy' when trying to take a picture. Recharging the battery and replacing the sd card didn't change...


b10909f.gif

2364a9a.jpg

I can help you fix the BUSY Error or Error 99 of your Canon EOS Rebel XS.

Installation of this Canon EOS Rebel XS firmware version 1.06 update will solve these problems:
  1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the BUSY indication remains lit in the viewfinder.
  2. The message, "Err 99 Shooting is not possible. Turn the power switch to<OFF> and <ON> again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out,the LCD monitor displays in a language that is different from the actual language setting.
See the firmware instructions and download the firmware upgrade by following these Fixya Tips :

  1. Follow this link to download a pdf version of the firmware installation instruction guide.
  2. Follow this link to download the Windows Version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  3. Follow this link to download the MAC version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  4. Follow this link to download the Canon EOS Rebel XS / Canon EOS 1000D Instruction Manual.

I hope that helps.

Nov 30, 2009 | Canon EOS Digital Rebel XS / 1000D IS...

3 Answers

Foreign language on my canon g11 camera: how do get to english


go menu, then with d-pad right one to the tool icon, then up 2, click center func/set, then across to english.

See http://www.steves-digicams.com/camera-reviews/canon/powershot-g11/playback-screens-menus-28.html for slides of menus

Nov 25, 2009 | Canon Cameras

5 Answers

Camera keeps resetting the settings when turned off


Possible solution?

PROCEDURE
1. Initialize the system.
a) Enter the TEST mode.
b) Select "3:ROM UPDATE" and press SET button.
c) Next, select "5:SYSTEM INITIAL" and press SET button.
d) The following message appears.
SYSTEM INITIALIZE
START ...
PUSH OK KEY?
e) Press SET button and System is initialized.
"SUCCESS !" appears on the monitor.
2. Write firmware.
Update the firmware version"
Write the firmware.
If the TEST mode boots automatically, change "USB TCC ON" to "USB TCC OFF".

Nov 06, 2007 | Casio EXILIM Card EX-S770 Digital Camera

1 Answer

How do I change the language?


You may need to repeat the following steps until the correct language setting is found. Instructions are in your User's Manual: 1. Slide the screen switch to PLAYBACK. 2. You will see a message asking you to select your language. 3. Press the SELECT button to see the language setting menu. 4. Press the SELECT button until ENGLISH is highlighted. 5. Press the BACK button to save your selection. 6. Slide the screen switch OFF.

Sep 13, 2005 | Epson PhotoPC 600 Digital Camera

Not finding what you are looking for?
Vivitar ViviCam 5150s Digital Camera Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitar Cameras Experts

kakima

Level 3 Expert

100357 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Vivitar Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...