My emachine t3624 can't get the 1920 x 1080 resolution for the e211h monitor

I wouldn't do that if I were you. All you have to do is configure the size and position option which the monitor will display giving you the option for adjustment..

Right-click on the desktop and choose properties. The resolution will be on that page.

I suggest you to buy a new monitor because it will be expensive to replace the LCD. You monitor LCD is damage that is reason why there is a dark color on the left screen.
To avoid any harmful accident in the future. Because it will create electrical spark inside the monitor which will be burn out the entire monitor or maybe result to smoke. There is no remedy in that particular trouble but to replace the entire LCD. But this is not advisable because it will cause you expensive cost of repair.
You need to buy new monitor and I suggest if you buy new monitor. Buy LED monitor which is better than LCD. LED monitor is a green campaign of every manufacturer due to energy saving specification and have a better graphics than LCD...
Hope this will help you a lot. If you any other question please don't hesitate to contact me

the monitors resolution range is only to 1280X740 or 780
and your video card may also need an upgrade.
The game may require a higher resolution that is not compatible with the the devices mentioned.

Your PC video resolution is set too high for the monitor to display. You should set it to the native resolution of this monitor, 1920 × 1080 @60Hz.
http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

Yes, it should be close by the AC inlet, labeled with F??.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Try to restart ur PC then it will auto detect ur monitor via DVI input. Actually, no driver needed for monitor in now day, they all come with plug and play.

if the speakers are built in try a new rca cable

Sounds like windows resolution or refresh rate is too high for the 15" monitor. Try starting in safe mode and setting the resolution below 1024 X 768 and refresh at 60. Restart.
Mike

found correct setting on vista windows support, for emachines flat screen 17". the setting is 1280x720.