Question about byD sign d:2232 22 in. HD-Ready LCD Television

3 Answers

Trying to find a power adapter for a bydsign d4032 40" LCD-TV the model # on the part is AD-12C-1. I tried Bydsign's website and all phones have been disconnected. We have a lot of these LCD panels and need a few power adapters. Any thoughts. BJ

Posted by on

  • 4 more comments 
  • BJewell Mar 14, 2008

    This is the info on the adapter, it is for a D4032 ByD sign. On the apater it has, model AD-12C-1 AC Input _100-240V 50/60Hz, 4A DC output +14 V - 16A + 15V - 2A, +5V - 0.3A. Hope this helps. BJ

  • kznervoso Mar 25, 2008

    were can i find the power adapter AD-12C-1???? is 14v 16a- 15v 2a- 5v 0.3a

  • 135 old boy May 08, 2008

    I would like any imformation on by D sign d;2332 LCD tv

  • Gary Joens Nov 22, 2008

    I am looking for an owners manual for my byDsign Undercounter TV/Radio/DVD Model d: 786. Also am having trouble getting more than one AM or FM station. Any ideas?????

  • tbw5457 Dec 13, 2008

    Please let me know what you come up with. I have the same problem. I really need the adapter. I already have two and both don't work. Where can I find a adapter or something very similar that will work with the TV.

    Please email me: williams_torrance@smc.edu

  • Jaime Hernandez May 11, 2010

    What are the voltage and current ratings for this AD-12C-1 adapter?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where do you live ,by D:sing made in Japan????? This is very good Tv I have more than 6 years and I never have any problem . And this never made in Japan.

Posted on Jul 25, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

DONT BY BY D:SIGN PRODUCTS THEY ARE M,ADE IN JAPANAND ARE VERY HARD TOO FIND.

Posted on Dec 13, 2008

  • tbw5457 Apr 07, 2009

    Hi All! I was able to get every last red cent for my 2K plus Flat screen from Hell!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Thank you for the info.
That adapter may not be easy to find with all those specs. It looks like these adapters are only customized to use on this brand of TVs.
My suggestion will be to try to fix them to the component level or if you can find a tech to do it for you.
Good Luck.

Call this guys:
bydsign worldwide
105 SE Executive Dr.
Suite 11
Bentonville, AR, 72712
United States
479-845-0680
trying to find a power adapter for a bydsign d4032 - 1x1_spacer.gif
Customer Service:
800-770-3771

Posted on Mar 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I also need a power adapter model ad-13d-2


hi Jaime

Can you call me or email 860.796.1562 / acosta.cal@gmail.com

I too have bad power supply...need repair...

Thank you in advance

Aug 03, 2009 | Ultra LCD30-500 Television

4 Answers

Flickering screen (likea strobe light)


one check your refresh rate in windows boot the pc into safe mode if flickering is gone then lower your refresh rate if not replace lcd inverter board.

May 16, 2009 | Gateway XHD3000 LCD TV

1 Answer

I need an original stand for a ByDsign D:4222


http://www.htmarket.com/ht-plt.html

http://www.peerlessmounts.com/dyn/Products/BrowseProducts.aspx/av/669/pagenum/3

Mar 17, 2009 | byD sign d:4222 42 in. EDTV-Ready Plasma...

1 Answer

No Picture, No Sound While Watching


Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.



LCD TV TroubleshootingThe defective LCD TV may have the following common symptoms:

Symptom: No picture on screen but LCD TV still has sound.
Solutions: The problem is cause by defective inverter. Replacing ivnerter will solve hte problem. Symptom: Screen flash on and off between 1/2 to a few seconds, but power indicate light stays on and TV still has sound.
Solutions: The problem is cause by defective inverter. Symptom: Blue Screen but no picture
Solutions: The problem is cause by defective Main Board(AD Board). In some cases, this problem may cause by the defective Screen Controller board. Thsi board is mounting on teh back of LCD TV Scree. Symptom: Power light stays on but no display and sound
Solutions: The problem is cause by defective Main Board(AD Board) or Power supply board. Symptom: No Power or Power indicate light does not lits
Solutions: The problem could cause either by defective Power supply board or defective Main Board(AD Board). Symptom: Screen is half dim and half bright
Solutions: The problem is cause by defective LCD Panel.It needs to be replace.


Hope it may help you;

Regards;
VOTIT

Jan 29, 2009 | RCA L37WD250 37 in. LCD HDTV

1 Answer

No picture


LCD TV TroubleshootingThe defective LCD TV may have the following common symptoms:

Symptom: No picture on screen but LCD TV still has sound.
Solutions: The problem is cause by defective inverter. Replacing ivnerter will solve hte problem. Symptom: Screen flash on and off between 1/2 to a few seconds, but power indicate light stays on and TV still has sound.
Solutions: The problem is cause by defective inverter. Symptom: Blue Screen but no picture
Solutions: The problem is cause by defective Main Board(AD Board). In some cases, this problem may cause by the defective Screen Controller board. Thsi board is mounting on teh back of LCD TV Scree. Symptom: Power light stays on but no display and sound
Solutions: The problem is cause by defective Main Board(AD Board) or Power supply board. Symptom: No Power or Power indicate light does not lits
Solutions: The problem could cause either by defective Power supply board or defective Main Board(AD Board). Symptom: Screen is half dim and half bright
Solutions: The problem is cause by defective LCD Panel.It needs to be replace.

This is a power supply problem. Try to check the fuses ,fusable resistor ,capacitor and transistor in power supply board.

Hope it may help you;

Regards,
VOTIT

Oct 01, 2008 | Olevia LT37HVS 37 in. LCD HDTV

1 Answer

Peascorn


I have a New OEM power supply for a byDesign 3032 TV.
If interested, please email me your contact info.

Thanks,

Art

Jul 17, 2008 | byD sign 3032 30 in. HD-Ready LCD...

5 Answers

NEED A AC POWER ADAPTER


Had same problem. Found brand new power supply that is original part from website below:

http://www.encompassparts.com/products/?PWW302-AD13D-03

It was about $100 w/ shipping. Took about 4 days to receive. TV works again!!

May 28, 2008 | Audiovox FPE3000 30 in. HD-Ready LCD...

2 Answers

Power Adapter


I NEED a new power adapter ttttttttttoo.. can you HELP please,, I allready had a so called TV repaire Man try to fix it he said he cant get a new power adapter for it to be fixed .... I stupidly PAYED him waited 9 months later, and still no TV fixed..Im taking him to smalls claimes court.....Very un happy persone ,I just want a new power adapter,....please some one out there...peascorn...I have d:sign TV 3032- ad-13d-2...

May 25, 2008 | byD sign 3032 30 in. HD-Ready LCD...

2 Answers

ByD sign d:5032 50 in. HDTV-Ready Plasma


If you purchased from a major retailer, could you try going to another store?

Also try contacting the manufacturer. Hopefully you are still under some kind of warranty, even if the place of purchase is no longer there.

Just to be sure, have you tried a different source - like a video camera, still camera with video output, laptop, or a different DVD player?

Good luck, I hope you can get it fixed!

Apr 07, 2008 | byD sign d:5032 50 in. HD-Ready Plasma...

2 Answers

No picture


btw for anyone experiencing these problems with the infamous "is-lcdtv32" byd:sign is the same manufacuterer as insignia, its the same company with a different sticker. i know this isnt a solution, but parts for all discontinued insignia';s can be purchased thru byd:sigh(by design). hope this helps .

Oct 06, 2007 | byD sign d:4232 42 in. HD-Ready Plasma...

Not finding what you are looking for?
byD sign d:2232 22 in. HD-Ready LCD Television Logo

Related Topics:

678 people viewed this question

Ask a Question

Usually answered in minutes!

Top byD sign Televison & Video Experts

Cindy Wells

Level 3 Expert

4800 Answers

ray gallant

Level 3 Expert

37593 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Are you a byD sign Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...