At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: What's the recommended height to install the Mr. Slim...
6"-10" from the ceiling. You do not want it to blow on you while you are sitting and you will need to be able to open the front cover to clean the filter.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Reason for water leaking. 1. Filter block. 2. Cooling coil block. 3. Alignment of indoor a/c unit is sloping downwards. 4. Drain pan block. It's advisable to service your unit first.
dear sir/madam
i think....
mr Slim A control R407c & R410a systems. P6 = indoor coil frost protection in cooling or indoor coil overheat protection in heating.
Cooling One of the 2 indoor coil sensors reads minus 15 deg C for 3 mins. Heating One of the indoor coil sensors reads over 70 deg C.
If you are sure the refrigerant charge is correct & system operation is correct then it could be a coil temperature sensor reading wrong temperature. If you have one of those little monitor things which plug into the outdoor circuit board you can monitor the indoor coil temperature. On later type remote controllers you can get all operating data like temp sensor data but you will need a service manual to do this. Or you can measure the ohms resistance of the temp sensors & compare with the chart in the service manual. if you can do it by yourself do if not then contatct ot mitsubishi maintenance personnnel for furhter action,
thank you
hope answer the question
please vote!
water coming out of an a/c is normal .its water outlet hose is wrongly installed or not installed at all.get it installed.also level the indoor unit towards the water outlet side when u install the hose .
Mitsubishi Mr slim comes with no diplay on the indoor unit but there is small display on th eremote unit.for further help kindly send your air conditones complete model
×