Question about Barebone Systems

2 Answers

KONICA 7145 PRINT DRIVER

KONICA 7145 WITH IP432, REQUIRE SOFTWARE FOR START UP 5.8 AND 5.6

Posted by on

  • Anonymous Mar 27, 2008

    None of the PCL6 drivers offered by minolta work for our used 7145 w/ip432. Using winXPpro SP2 workstations in a server 2003 env. Please let me know!

  • mauroluna May 06, 2008

    I have a Konica 7145 connected to the network. I configured the IP address and others network parameters. I can ping it by my PC. I installed both of v4.4.12 and v4.4.17a drivers downloaded from Konica web site but when I try to print, nothing is printed and Windows gives me a connection error. I have WinXPPro on my PC.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The Konica Minolta 7145 have two different companies that made the print controller. If you have an older KM 7145 then you need the old Peerless Legacy driver. It's not on KonicaMinolta's website. You can use HP 5Si driver, but you won't have and of the options (ie finisher, fax, lcc).

Posted on Jul 08, 2009

The PCL6 drivers do not work. I have the original PCL drivers for the Konica 7145 IP 432 Print engine which do function on Windows XP SP2 Workstations.

Posted on Jul 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Connect x2580 Lexmark printer to toshiba laptop


Hello chuck01438 ,


  1. Remove the printer out of the box and connect the power cable to a power adapter.
  2. Install the drivers and necessary software. Enclosed with the printer package should be a driver CD-ROM for the printer. It might also contain some print enhancement software supplied by the manufacturer of the printer. Follow the instructions for software installation.
  3. Connect the square end of the USB cable to the printer and the rectangular end to your laptop.
  4. Turn the printer ON. Your laptop should find the newly attached hardware, and recognize it as printer.
  5. Open any document or picture and click on Print in File menu or click on a printer icon in the toolbar.

Mar 26, 2008 | Barebone Systems

1 Answer

Lost disc and would like to add printer to new computer?


simply go to the manufacturers web site and under the support section go to software and driver downloads ... download the driver package and follow the instructions supplied. Most printers require the software to be installed before hooking up the printer cable

Mar 29, 2008 | Barebone Systems

1 Answer

Printer Problem


error occurred
1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on.
3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.)
4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter.

Mar 19, 2008 | Barebone Systems

1 Answer

Konica 1400 w printer issue


buy a new printer thats not garbage.

Mar 17, 2008 | Barebone Systems

1 Answer

Konica spooling endlessly, not printing. How to reset?


Call tech support! That's why these people get paid. Sites like this wouldn't need to exist if they did their jobs correctly!

Mar 11, 2008 | Barebone Systems

1 Answer

I need the software for my canon ip6000d i can not print.


1st, a barebone system is a omputer hand built, 2nd
http://www.techspot.com/drivers/driver/file/information/8993/
This will get you printing in no time!

Feb 23, 2008 | Barebone Systems

1 Answer

Need software to print


Hey there hagiang, your request was not very specific so I will assume you are looking for the driver for your specific printer. These drivers usually come with the printer on a CD. They are often auto-install and guide you through the setup. These drivers are specific to the manufacturer and model #. If you go to the manufacturer's website you should be able to search out the driver you need. Hope it helps. Good Luck!

Jan 31, 2008 | Barebone Systems

1 Answer

HP Deskjet 840c - Printing Emails


I did see you reinstalled your software) but please continue
It is important that you have that icon by the clock. Power off the printer by pressing the power button on the printer.
Please un-install your printer software through Add/Remove Programs within the control panel. Please restart the Pc after un-install is complete. Create a folder on your hard drive and name it, "HP DeskJet 840C". Go to this link listed below & download the printer driver software listed. When you save to disk you can choose where you want to save. Pick the folder you created. Save inside this folder. The HP driver (Will most likely be updated software). I promise, you will have a icon down by your clock when finished.
http://h10025.www1.hp.com/ewfrf/wc/product?product=59868&lc=en&cc=us&dlc=en&submit.y=4&submit.x=7&lang=en&cc=us
Follow the instruction in your manual for setup & installation.
If you using Outlook Express & you want to print or send through your printer the page should be set as 8.5x11". Orientation should be set to Portrait, unless you set this for A4.
Lastly, please turn off your anti-virus software during install & re-install. Just in case you come back to this thread!
please vote...

Jan 30, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

4,199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...