I require a new Canon GP 30F Xerox Meachine. I K.Suresh Babu from Bhimavaram,West Godavari District,AP.
Can You Help Me
Cell No; 9848790587
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There isn't much you can do, except perhaps buy at least one new board. But those are expensive In this case, a better solution is to call Xerox. This correction must be done by an Authorized Xerox technician, with their proprietary laptop called a PWS.
They will run the procedure called GP-10 Replacing Billing PWBs.
I.e. Teflon problem if u getting the paper jam in fusing unit every time teflon is cutted in fuser unit is getting prints after meachine on and off, problem with the sensor u cleam it that's work fine. for any information plz mail me e-Mail : email@example.com, 919290062654
E051 indicates that the side or horizontal registration sensor is not detected try to
switch off/on the machine but if the same error code display again thereis a small motor that drive the sensor assy should be change.try to
move the sensor manualy by opening the upper right side peep inside you
will see a long white plastic wth teeth push to this to right side hope
this will help