Question about Bell & Howell BH-10 Digital Camera
I was recently given a Bell & Howell BH-10 Dual Mode Camera (8001 CF). I have installed the Drivers as well as Photo Express 4, Photo Express 6 and Ulead Cool 360 from the accompanying CD. When I check the device manager on my computer the camera is listed under Imaging Devices and it indicates that the device is working properly. The other USB devices on my computer are working properly.
When I open Photo Express 4, click on Get Photo, select the BH-10 Camera and then click on Acquire, I get the following message: "Failed to open camera".
I have tried uninstalling everything and doing a fresh installation but nothing seems to resolve this issue.
Do you have any suggestions?
You should have had a cable come with your camera; one end would plug in to your camera with a small square end, and the other end would connect to your computer. The computer end would be a standard USB end. You should have also received a disc in your box that had software to load onto your computer. Once that software was loaded, you would plug the camera in. Your computer would recognize the camera and startup the software. A box would open and it owuld give you a choice of things to do. Usualy it would give you thumbnail views of all of the pictures in your camera and ask if you wanted to copy only some of the pictures over to the computer, or all of them. It would also allow you to delete all of the pictures from your camera.
If you go to either of the following websites you can download the software you need.
That should do it.
Posted on Apr 07, 2010
Kindly get it downloaded here :
best regards, Jay
Posted on Feb 19, 2011
Tips for a great answer:
Feb 04, 2011 | Bell & Howell BH-29 Digital Camera
May 14, 2010 | Bell & Howell BH-22 Digital Camera
Apr 30, 2010 | Bell & Howell BH-10 Digital Camera
Apr 07, 2010 | Bell & Howell BH-10 Digital Camera
Mar 23, 2010 | Bell & Howell BH-22 Digital Camera
Mar 12, 2010 | Bell & Howell BH-22 Digital Camera
Mar 09, 2009 | Bell & Howell BH-10 Digital Camera
365 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: