Logitech wireless mouse

I use Logitech wireless mice and so does my wife. After a battery change you have to reconnect the mouse with the wireless receiver
. First push the button on the receiver, then push the button on the bottom of the mouse. It should connect and you will be ready to go. If this doesn't get the mouse working, you may have to unplug the mouse, then plug it back in the USB port, then reconnect to the receiver. Hope that helps.

I'm not sure can I help you, I had same issue with logitech, I couldn't solve issue, until I found program (app) that had option to connect them, search on hp for application.
Logitechs one is called SetPoint.

Hi,

1. Change batteries
2. Go to control panel
3. Click Bluetooth Icon
4. Delete the Bluetooth Mouse
5. Click on Add new wireless device
6. Press the pairing device on the keyboard
7. Bluetooth Mouse will be detected
8. Follow the onscreen instructions

Hope this helps, Tried it several times and it works perfectly

Mouse will have to be reset to connect. There will be a small button underneath. Press and hold this for a few seconds and try again. Good Luck. Ian.

Make sure your computer is laser compatible.

i have the same wireless keyboard. i suggest that u redothe setup process and setup the mouse first. if the problem persist then move the wireless scanner.

HELLO, ALL YOU HAVE TO DO IS TO DOWN LOAD THE SOFT WARE THEN PLUG IN THE USB AND AFTER THAT ON YOUR RECIEVER CLICK THE CONNECT BUTTON ON THE RECIEVER TILL IT RECONIZES BOTH KEY BOARD AND MOUSE I HAVE THE LOGITECH WIRELESS SYSTEM AND I LOVE IT TILL THE BATTERIES GO OUT ON THE MOUSE OR KEY BOARD LOL THEN RESTART YOUR COMPUTER.

Logitech does provide the replacement part for your USB mini-receiver, check the following website (availability 2009Oct23): Click Here

YBC (/\)

did this come with software
and you might need to do a uninstall reinstall
if it worked on same pc before it should work now.
if you have a reset button on transmitter try resetting it.

Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud