Question about Kitchen Ranges

2 Answers

Good evening, I need your help. My gas stove stopped to work when I tried to change time. As for me, I touched by mistake the oven cleaning bottom. Currently door is blocked, and inside of oven there is working fan and I can feel cold air. I cannot stop that process, I couldn’t open the door. Now we turned off electricity supply to gas oven. Respectfully, Yeva

Posted by on

  • 1 more comment 
  • yeva Mar 14, 2008

    I didn't mentioned that my gas stove build by Frigidaire, electric wall oven, electrolux gallery serios



    respectfully,



    Yeva

  • yeva Mar 14, 2008

    I did that three days ago and didn't touch oven. I plugged it today and it's remain the same, door is closed, fan is working and running cold air.
    Yeva

  • yeva Mar 14, 2008

    Dear friends,



    This is my first time that I applied for help. Thanks a lot for giving me advices. It's worked



    Respectfully,



    Yeva

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers

Hello!

REset the time setting of your gas stove. Unplug it and reset the time and fix back what you have touch in the oven. it should be in factory setting. refer to your manual..in doing this.melnavz

Posted on Mar 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Kitchen Ranges Master
  • 2,651 Answers

Try plugging back in now, it shouldnt remember the last cycle it was in and should even try to test the lock/latch upon power up as part of a self diagnosis. fan would remain on only as long as unit emained hot(in order to keep the electronics cool)

Posted on Mar 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stove top ignitors do not ignite but oven does.


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Mar 20, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Gas stove with electric ignition (oven stopped working)


the electric ignition is bad and needs replaced in oven. I had the same problem a few months ago and it was the ignitor for the oven. if replacing it yourself, be very careful with ignitor, it is very fragil. do not touch ignitor itself, hold on to it by the base of it. they are not that hard to change.

Jan 31, 2010 | Kitchen Ranges

1 Answer

I have a GE xl44 gas oven/stove. I cleaned the


Change the Temp sencor for the self cleaning

Dec 05, 2009 | GE Kitchen Ranges

1 Answer

Gas stove /electric starter won't click to start cleaned stove


Try cleaning the starter with rubbing alcohol and toothbrush. There might be soap or boiled over residue on the starter. If that doesn't work, try using fine 150 grit sandpaper and gentle clean the starter with it. This problems drove me nuts too. Good luck!

Mar 01, 2009 | Stoves Kitchen Ranges

1 Answer

Maytag MGR5875QD stove problem


bake and broil feature not even responding to touch???? its one component " the electronic range control" clock assy. after trying to unplug and possible resetting the control. i would say youll need to replace the control unit.

Mar 23, 2008 | Maytag MGR5875QD CleanDesign Gas Kitchen...

3 Answers

Ignitors keep firing by themselves after my aunt cleaned them 24 hours ago After she did the major cleaning of the stove I used the oven and it worked fine. I lit a burner (Probably front?) and the left...


If they ignitors worked properly before you aunt cleaned them, the problem could be with the way they were cleaned and what they were cleaned with. Please tell me how she cleaned them and with what. Also, had she cleaned them before without incurring any problems, or was this the first time she had cleaned them?

Dec 03, 2007 | DCS RGS-486GD Gas Kitchen Range

1 Answer

Oven wont work at all.


Convection oven and Bake will not heat past 200degrees. Broiler works fine and the range works fine.This is for the Model # MGR5875QDW, Gas Precision Touch Control 800, can you help. Thanks Kasz3

Dec 24, 2006 | Maytag MGR5875QD CleanDesign Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

paulcarew

Level 3 Expert

2364 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...