Question about Lands Phones

1 Answer

Motorola V3i White screen problem

My Motorola V3I has a white screen, i have replaced the key pad membrain and the problem still exists, what would be the next most common thing.

Posted by on

  • SMHA Nov 10, 2008

    My phone is having the same problem. Out of no where my Motorola V3i screen disappears and goes a solid white (sometimes changes to black). I called my cellphone company and they basically are going to charge me a **** load to repair. I have only had the phone 3 months and have been very careful with it. Everything else appears to work but the screen... I would appreciate any help. I have already tried to turn off the phone and remove the battery and then power back up, but it did not help.


1 Answer

Change flex

Posted on Mar 14, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Lg optimus l5 e612 goes white acreen

looks like you need a new screen. It could be an hardware issue.
Find a place to replace the screen might solve the problem.

Jul 09, 2013 | Lands Phones

1 Answer

White screen 6500 slide I need help plz I've

Display can be Lcd,Flex connector,board connector,display IC etc.

If you already try at least 2-3 lcd, take another step of replacing flex connector 2-3 also, to make sure that the item you bought has no defect.

If this 2 parts didn't make it, check the board display terminal if its clean and corrosion free. resoldering each terminal may be helpful enough.

last option is replacing the display IC, it will serves as a fuse of it, a clystal square type that generate current to be able to display on screen.

Jun 28, 2011 | Nokia Lands Phones

2 Answers

Is there a simple reason why the screen on my samsung mobile has gone blank.the phone can still turn on and off and keys still make sound when you press them as they normally do but nothing on the screen...


The problem is from the flex that connects your screen to the phone's main board. This flex must have worn out that's why your screen is not displaying any picture.

The problem is common with flip and slide phones. The flex gets worn out as a result of constant opening and close of the flip or slide phone.

I would urge you to replace the flex and I am assuring you that your screen will display picture again. You might also be lucky to find out that the flex is not well fix, that is, it may have loosed contact.

If you cannot change the flex yourself, maybe you should take the phone to a local repairer within your vicinity, so that the flex can be fixed/replaced.

Take care.

Nov 15, 2010 | Samsung Lands Phones

1 Answer

I cant connect to the internet using my V3i

you can connect try to click on web then start using.

Jun 18, 2009 | Lands Phones

1 Answer

How can i block particular numbers by using motorola v3i set.

just enter the settings and go for call barring, in the call barring add the no which u want to block or enter the call contacts and set the no in screening no the no u want to block

May 15, 2009 | Motorola Lands Phones

1 Answer

Screen has gone white on a Motorola phone.

I had a couple Motorolas do that. Its an internal problem. Send it to them and theyll send you a replacement for free ( they did for me 2 times ) good luck

Nov 14, 2008 | Motorola Lands Phones

1 Answer

My screen is always white and my phone keeps making the starting up noise.

If the screen is white there are three types of contact service 1. contact retailer 1. contact service 3. contact service with a white screen. If this problem exist possible trouble is from the IC but try to flash the phone using a flash device for cell phone. If it doesn't work maybe the rubber connector that attached to your phone.

Jul 01, 2008 | Lands Phones

1 Answer

I have a moterolla V3i that was locked by the second company I used. The IMEI # 351538011243726. I discovered this when I recently signed up with centennial wireless. i wireless won't help fix the problem...

u can get it unlocked from motorola service centre u must tell them that it is a lock code by operator u must tell them that u have changed the lock code from default(000000) to what i dont remember

May 07, 2008 | Lands Phones

2 Answers

Key pad on corless handset is not working

There is solution but it will only work if you are a handy person. The product is call ctrubber.jpgRubber Keypad Repair Kit and you can buy it here

Mar 31, 2008 | Motorola Mobility MD41 Cordless Expansion...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts


Level 3 Expert

101516 Answers

Cindy Wells

Level 3 Expert

4883 Answers


Level 3 Expert

67800 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides