Question about Nor-Lake Norlake Refrigeration 4' x 6' Kold Locker Walk-In Cooler - 6' 7'' High w/Floor
My upright whirlpool is not freezing the temperture is running about 60 degrees (f) do i need frion or what.
Tips for a great answer:
Jul 21, 2015 | Whirlpool Gold GS6SHEXNQ 25.6 Cu. Ft....
Jan 23, 2015 | Whirlpool Refrigerators
Sep 08, 2011 | Kenmore 24.8 cu. ft. TRIO Bottom Freezer...
refrigerator is not cooling properly it can be due to a defrost timer, which is
causing the fridge to go into defrost cycle. Usually it takes 45-60 minutes for
refrigerator to come out of defrost cycle. If the timer
is bad then it will not come out of defrost cycle and
can result in this kind of issues. It can also occur due to defrost thermostat,
it allows current to pass through it at temperatures of 20 to 30 degrees
Fahrenheit and prevents current from passing through it at 40 to 60 degrees.
This is difficult to test, though, because it takes a prolonged, very-cold
temperature to turn it on. The defrost thermostat is
snapped onto the top portion of the evaporator. The thermostat sends
temperature information to the processor. The defrost heater must be replaced
when replacing the thermostat.
1. Remove the lower fan duct work from the evaporator cover.
2. Remove the 1/4-in. evaporator cover screws and remove the evaporator cover.
3. Disconnect the defrost thermostat wiring connector.
4. Remove the defrost thermostat from the evaporator.
Hope this helps...please post back for further
Jul 17, 2011 | Whirlpool Refrigerators
Check out these tips...they can help you figure out what is going wrong with your refrigerator and why it is not cooling
Refrigerator not Cooling or Fridge not Cooling
How to Defrost Refrigerator Defrost Timer Problem
Water Running in refrigerator from Freezer
Mar 13, 2011 | Jenn-Air JCD2290HES Side by Side...
Dec 11, 2009 | Whirlpool Gold White-on-White 21.9 cu. ft....
Nov 21, 2009 | GE Profile PFSF5NFW Bottom Freezer French...
Jul 10, 2009 | Whirlpool GD2SHGX Refrigerator
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: