Question about Projection Televisions

1 Answer

My Sharp Aquos TV turns itself on and off. There is no picture most of the time, and the audio comes on briefly. The power light and the OPC light flash simultaneously at times. The remote only works some of the time. I spent hours last night re-checking settings and have come to the conclusion it is nothing I have done. I have heard horror stories about Sharp service and am almost afraid to call. The tv is under warranty and less than 6 mos old.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Sharp people told us they have had 35 complaints in my area about the Cable company signal (Cablevision) screwing up these t.v.s. Seems the digital channel settings are not compatible with the signal. I tried to confirm this with the cable company and they have no plans to fix anything on their side. If I unhook and re-hook the cable, the t.v. seems to work again. This is annoying because it happens on ABC where my favorite shows are!

Posted on Mar 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp aquos tv chevron flashing but tv wont come on


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Jun 01, 2016 | Sharp Projection Televisions

3 Answers

My Sharp Aquos has lost it's picture brilliance on all channels.


Try adjusting picture settings from tv menu, if this does not work your tv has a bad crt board in need of replacement

Jul 29, 2008 | Projection Televisions

1 Answer

Blinking led


if you need a led bulbs you can find some good ones in b2cled.com

Mar 29, 2013 | Sharp LC32D44U Aquos 720p LCD HDTV, 32...

1 Answer

I have a 52 inch sharp aquos t.v. I turn the set


Your pictures power supply may have faulty capacitors on it. Or you could have a surface mounted component that has broken free at one end.

Solving your problem involves having your tv inspected by an electronics tech who hopefully can fix the unit at your home.

Otherwise, there is very little you can do as a consumer.

Good luck and be careful.

Feb 12, 2010 | Projection Televisions

1 Answer

I have a 52" GE-HDTV/Monitor. After the unit is turned off, it will not come back on-at all now. When I try to turn it on, the green light on the front of the TV comes on briefly, then goes off. I can...


replace CP150 CP114 and CP120 all three capacitors are available at the following link with free instructions they are listed under the RCA parts category which are the same ones for your GE TV.
http://servicemanuals.vstore.ca/

Jan 17, 2009 | GE D52GW12 52" Rear Projection HDTV-Ready...

2 Answers

Sharp LC-32DA5U


sounds like youve had a pic tube go out,,probly just one and the other 2 are still good,,thats why it came bck on,,take it to a tv shop ,know ,,want be that much if its just one pic tube,,good luck

Oct 05, 2008 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

New Sharp Aquos LC37X20E. After 30 mins turns itself off to standby and comes back on after 2-5mins (even though the automatic return to stanby has been set to "disable"). Eventually after...


According to Sharp it is a software problem. Engineer came, installed software update ,10 minute job.....TV worked fine for 1/2 day unfortunately: Then images turned black and white in all channels TV turned itself off, and stanby and OPC buttons started flashing. When TV came back on its own 10 mins later , screen had 2 large square staines superimposed in image (as if it was a burnt screen)...Engineer will be back next week...all quite sad really for a new TV.....will keep u posted

Jul 03, 2008 | Sharp Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...