My PBX hipath 3550 restarts about 10 times daily,what can i do?

this 1009 Is lame city, support is zero.

all I found is this,
https://uploads.mycusthelp.com/SOUTHERNTELECOM/PB1009X_Factory_Reset.pdf


PB is owned by Acer.com as is gateway name (old)
PB did not make it that means acer.com did not/.
who made it is hard to track but is covered in the PB wifi
who did that, first ones sold in Penny's stores then now.
seems like same maker (in Europe) sells them in walfart now. do not buy this junk buy real PCs. ok
buy dell or hp.
then real support happens.
here is the wiki quote on this name game BS.

Never buy PCs from BPX. its junk and has no support.


On October 14, 2016 PBX Holdings acquired the United States Packard Bell trademark. PBX Holdings is led by a group of investors with experience? in the technology and retail space. PBX began manufacturing Packard Bell products in 2017. In June 2017 JCPenney revealed that they would begin selling a line of Packard Bell laptops as part of their expansion into the dormitory market.[11] PBX is set to expand the brand into home automation and gaming accessories with product launches set for the Holiday 2018 season.

read the youtube lemon rules and learn

https://www.youtube.com/watch?v=wyGovGoEF04

calm down. Breathe deeply and get a grip on reality. Someplace is customer support. If not, you've been grubred.

some place is a wire that hates you or software designed for ignorance Get a grip on it and solve it yourself, or start a riot. no more comment on thin questions if you cannot have MFG CU SPRT.

This sounds like an RTP stream issue. While SIP runs on port 5060 by default, the actual audio is run on much higher ports, 10000 and up. If your pbx system is not on a public address and you are forwarding traffic to your pbx via a router, check the RTP port range in your pbx and make sure you are forwarding those ports correctly. By putting the call on hold, you stop sending out audio traffic restart sending audio when you pick the call back up. By forwarding the entire RTP range to your pbx, this should fix your issue.

Try #86 on each handset to enable CLI and *86 to suppress CLI.
From V3 to V7 is big. Motherboard upgrade.

It requires an external MOH adapter. P/N is either 20145 or 21514.

Carl

power on your printer.
While press & hold power button open & close the top cover for 5 times and release the power button.

Dial #0

This resets all handset features!

My solution then, is do not use CuteWriter as it sounds like it is causing a problem..

Have you tried this program/pdf on another computer? Does it have the same error?

try 684 again