Question about Breadman TR2200C Ultimate Bread Maker

1 Answer

Stopped stirring, jammed sound

Our Breadman stopped stirring in the middle of a cycle one day. it made n awful noise that sounded like it was stuck or something. I took out the dough to check, and even lifted the pan but the thingy that is supposed to turn the wheel in the base of the machine isn't even moving. the power and everything else is fine.

Posted by on

  • Portia Kat May 22, 2008

    I'm having the same problem. We are trying to spray the bottom (outside) with lubricate spray. I may have to order a new bread pan somewhere.

  • mahadevd Jun 24, 2008

    I have home Breadman Ultimate bread maker.The mixing blade is jam and does't rotate.

    Anybody have the solution/answer for this trouble?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Had a problem like that let water in too long soaking.
It seized up.
Put olive oil on the shaft and let it soak in,
Then turn the shaft back and forth til it loosens up.
Don't let water sit too long and don't use oil that you wouldn't drink.

Posted on Jul 24, 2008

  • Jennifer
    Jennifer Jul 31, 2016

    How long did you have to let the oil sit?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge washing machine/stopped in the middle of the drain cycle


sounds like your pump has got jammed with a coin or usually hair grip.

Sep 18, 2016 | GE Washing Machines

1 Answer

Frigidaire Laundry Center GLEH1642FS1. 4 years old. The dryer was making an awful sound, sounded like something was stuck behind it while it was running making a scraping sound. Today in the middle of a...


there is a bearing at the back of the drum that gets dry and sometimes the ball part wears down causing the noise you are hearing i would check that first

Jan 25, 2018 | Frigidaire Washing Machines

1 Answer

My LG front loader washer stops in the middle of it washing with the error code LE. For some reason or another it sounds as if a screw is loose in the drum or something in or near the drum is off cause it...


"Lock Error"

The fault code suggests that the lead that runs to the door interlock switch is faulty, has come off or is loose (Probably the latter by what you describe). I can't inagine how this intermittant error could be linked with what sounds like an item stuck in the drum.

For the item in the drum, I have sucessfully removed screws and the like by thoroughly draining the machine then turning it onto its face, supported by enough bricks or other items to allow me to have the door dangle open. Gently spin and rock the drum back and forth and let gravity do the work. It doesn't always work, but it often does.

Jun 28, 2011 | Washing Machines

1 Answer

Water will not drain humming noise


Humming sound could be jammed pump.Remove th filter and check pump Blades are free, nothing is stuck in it....

Nov 25, 2009 | Washing Machines

1 Answer

Motor works and then gets sluggish and slow


WELL, WHEN YOU UNPLUUGED THE BLENDER, AND RESTARTED IT - DID IT WORK. iF IT DID THEN IT MEANS THAT IT HAPPENED MIGHT BECAUSE YOU HAVE NOT BEEN USINGTHE BLENDER OFTEN.

bUT IF ITIT MAKES THE SOUNG AFAIN THAT THE MOTO OR WHERE THE CORD IS- SOME WATER MUST HAVE GONE INSIDE. IT IS BEETER OF YOU TO CHANGE THE BLENDER BECAUSE IT IS ALWAYS WRITTEN IN THE HANDBOOK THAT IF IT MAKES ANY KIND OF AEEFUL SOUND OTHER THAN THE NORMAL SOUND- STOP USING IT IMMEDIATLY.

Feb 23, 2008 | KitchenAid KSB5 Professional Stainless...

1 Answer

Whining noise, only in rinse and spin cycle, sounds awful.


Check the pump to make sure there isn't something stuck in it.

Dec 30, 2007 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Stalled Motor


quite possibly the drain pump which would cause it to stick in rinse cycle. the humming noise you heard is probably the drain pump powered up but jammed. likely cause is a foreign object stuck in the pump impellor - main culprit is bits of bra wire. take the pump to pieces and extract whatever is jamming it.

May 12, 2007 | Kenmore 24852 Top Load Washer

Not finding what you are looking for?
Breadman TR2200C Ultimate Bread Maker Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Breadman Kitchen Appliances - Others Experts

Irene Tulloch

Level 2 Expert

484 Answers

paul
paul

Level 3 Expert

822 Answers

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

684 Answers

Are you a Breadman Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...