Question about HP PSC 950 All-In-One InkJet Printer

1 Answer

Hp psc 750 and 950 mechanical repair manuals

These machines are outdated and I would like to find a couple of repair manuals so that I might repair them myself. I have a great ability to take something apart and put it back together, putting each piece back where it belongs. I can recognize faulty or broken parts. But I need the manuals for the details needed to put it back together properly. Can you tell me where I can get these manuals? If so I would appreciate it. Both scanners are malfunctioning. Sam Whaley, roberbrn@yahoo.com

Posted by on

  • 2 more comments 
  • rober baron Mar 30, 2008

    I apologize for being so late in sending this comment, I offer no excuse. Your directions for repairing my printers was fantastic, you could have been in the room with me silently reading your instructions to me. They were perfect. Thank you, Sam.

  • jjbaxfam Aug 23, 2008

    I have the PSC 750. The long white electrical connection that is inside the printer that attaches to the print carriage that holds the ink cartridge has disconnected from the carriage. I am looking for instructions to reconnect it.



    Thanks



    Jason

  • Anonymous Oct 10, 2008

    hp psc 950...paper feeds "rough" sometimes....high quality photo copy paper jams and will not print entire page

  • Anonymous Oct 31, 2008

    scanner warming up message

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 73 Answers

Well they dont sell parts nor sell manel for sev guide for these if they would fix it they would replace it ok scanner dont work have u tryed latest drivers form website 1st remove old before u install new ok if that dont do it bad scanner and u wont be able to get parts or take it aprt atemp to fix it unless was simple like wheel feel off its track that wopuld be just taking it aprt cheak ing the rubberbands and wheels for prper line up ok thx nick

Posted on Mar 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scan multiple pages hp psc 750


Hello
The very appearance of you machine would indicate to me that the only way for you to scan multiple pages is to load and scan them one by one, as there is no automatic document feeder on the machine, just a manually lifted cover for the platen (glass).
However you can get a manual here:-
HP PSC 700 User Manual
by clicking on the green "Download" button near the top of the page, and following the subsequent instructions to download the pdf file to your computer for future reference.
HP provide a number of support options as well, which can be accessed from this page:-
HP PSC 750 All in One Printer support
Hope this is helpful, if so would you please register that with Fixya
Cheers

Feb 27, 2015 | HP PSC 750 All-In-One InkJet Printer

1 Answer

HP PSC 500 makes loud noise and says paper jam, but theres no paper jam!!!!


The carrier shaft is probably dry. Use sewing machine oil or 3 in 1 oil and put a couple drops on either side of the carrier, move is back and forth a couple times then power on. While in there, clean the pick roller with a damp cloth and rub the rollers horizontally

Nov 25, 2010 | HP PSC 500 All-In-One Printer

1 Answer

You helped me figure out my scanner mechanism problem with my HP PSC earlier but what I need to know is do they sell a replacement part for it, how much is it and if so am I able to change it myself?


Inkjet printers are usually not serviced. They are made to sell so cheaply that the difficulty of dismantling them for repair can cost as much or more than a new replacement.

One thing you could do is find a used one and strip it. As there are usually no service manuals for inkjet printers, this will allow you to discover how it comes apart, and whether it's worth the hassle.

May 01, 2010 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

PSC 2210 the machine is overheat and won't go


I will tell you my friend to replace the formatter board and do service the mechanism.

Jul 11, 2009 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

I have a hp 2200 all-in-one printer. For some


if it sends ok, then it has probably been switched to "manual receive" form "automatic mode"

Apr 21, 2009 | Office Equipment & Supplies

1 Answer

How do I install the new cartridge latch (color) of my HP PSC


You will need a small TORX screwdriver (star shape) to remove 3 screws.


see my post @ techtalkz.com/hp/124170-hp-psc-2210-cartridge-latch.html

Jan 21, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

HP PSC 2110 not printing, copying, scanning


It sounds like you have a mechanical problem with the printer, these printers are pretty cheap new but are not very cost effective to repair, which is why you do not see many repair shops that are willing to work on printers.

you will likely have to replace the printer as any repair would cost more then replacement.

Although if it is still under warranty you could send it back to HP.

Jan 20, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Paper jam


It's pretty rare to not be able to manually clear a paper jam. Occasionally, after you clear a jam, some paper gets stuck in the mechanism where your fingers can't reach. In that case, part of the printer mechanism needs to be taken apart to get to the jam. Like I said, it's pretty rare, but when it happens, your only option is to take the printer to a certified printer repair shop or back to the place where you bought it to get it worked on. Unless you know what you're doing, I wouldn't recommend using tools inside the printer yourself. You run the risk of damaging the mechanism and making your current problem worse.

The HP web site does publish a couple of solutions. Have a look at the information on the following two links and see if there's anything you may not have tried yet:

Clearing a Paper Jam

Clearing a Carriage Jam

Post back whether or not either of these links worked out for you. Good luck.

Oct 01, 2008 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

PSC 2210 Scanner Doesn't Work


I'm not sure about this specific model, but I've had similar problems with other HP all-in-ones and usually what fixes it is uninstalling and reinstalling the software (make sure to follow their directions properly and not plug the printer in until they tell you to). You should also make sure you're using the most updated software from the HP website rather than the one that came on the CD with the printer which may be outdated.

Jan 05, 2008 | HP PSC 2210 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 950 All-In-One InkJet Printer Logo

Related Topics:

786 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...