Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Prnter kodak easyshare 5100

Im buy one printer yesterday model kodak easyshare 5100 and i have problem for calibration...just not rinted nothing...you can said me what i can do?

Posted by on

  • 1 more comment 
  • marco198024 Mar 13, 2008

    i understand because im is portuguese

  • Anonymous Apr 11, 2008

    Trying to install.Won't callibrate. Ink lights flashing

  • Patrick Michaels
    Patrick Michaels May 11, 2010

    marco, se hable espanol?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Just to check, is what specific lights is blinking is it the check color or just check black inks??
-to make sure w/ this one is it blinking too fast or slow and what is the color?? check if the on and off is also blinking

-check black ink and check color cartridges blinking fast means no printhead installed

-check black ink and check color cartridges blinking slow, no cartridges installed



-check black ink and check color cartridges blinking w/ on and off ready to calibrate
(in ready to calibrate if doing nothing, just press cancel and

-press photo and cancel on printer, if not doing anything

-remove printhead( the one that holds the cartridges) turn printer on and off, put printhead back to printer w/ cartridges, and check the lights that is blinking

-press photo and cancel again
-if not doing anything, contact manufacturer
-goodluck

Posted on Apr 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a calibration sheet for my Kodak easyshare printer 5100, ir qill nor print a thing and I do not have this sheet


i put new cartridges in my printer but it will not print anything i also cleaned the printhead but still nothing happens what is wrong

Sep 08, 2010 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

What "Printer" to choose?


Your pronter should have come with a driver disk. You should disconnect your printer from the computer and run the installation from the disk. When prompted, connect the printer to the computer to complete the installation.

May 17, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Printer will not print black ink


Seems to be a common fault with Kodak EasyShare 5100/5300

Contact Kodak Support and go though the following tests:

Remove and re-seat Printer Cartridge(s) - Done

Clean Printhead - Done

Calibrate Printer - Test Sheet Not Complete!

Run Computer Colour Test - Done

They will then send you a new Print Head.

Mar 25, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Calibrating 5100 kodak all in one easy share printer


Go to the printer maintenance program and select "Calibrate printer".

Jan 26, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Kodakeasyshare5100


To help you out w/ this issue use the Kodak website www.kodak.com/go/itg then use "image quality/blank prints"

Oct 18, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Color is all wrong


Your pictures are coming out with a blue tint. Remove the color catridge and look at the bottom of it. the Yellow is probably green. If it isn't, trying performing a printhead cleaning through your home center. After that, calibrate the printer, you may see that on the calibration sheet, that colors are missing. Scan the calibration page and then try your printing your pictures. If that doesn't work, contact kodak tech support, you need a new printhead.

Sep 03, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

4 Answers

Kodak EasyShare 5100 All in one printer


call the hotline number they are having a problem with the print heads they need to be replaced!

Aug 25, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Can not get my new kodak easyshare 5100 t o calibrate


What is a easyshare 5100 kodak? Is it a copier?

Jul 14, 2008 | Office Equipment & Supplies

1 Answer

KODAK EASYSHARE 5100 SERIES


a blinking yel light w/ "F" on display means MEDIA SENSOR FAILURE
"P" PRINTHEAD FAILURE
"S" SCANNER FAILURE

Mar 11, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...