Question about Office Equipment & Supplies

8 Answers

Ordering Belt Unit Dell 3110cn

I started to get a message on above printer stating that the Belt Unit is at the end of its life. I've tried to call Dell spare parts to order the part but they are unable to locate it for me. Is there anywhere else I can go?? THANKS. Ed

Posted by on

  • 1 more comment 
  • Anonymous Dec 01, 2008

    I'm getting the same message on my Dell 3110cn: Belt Unit Close to Life. Nothing on the Dell website shows a part called the Belt Unit. Where can I order this part?

  • Anonymous Jan 28, 2009

    says i need to replace belt soon

  • Anonymous May 20, 2009

    Yes, our printer is giving us the same message. When I called our Dell rep from whom I order the laser toner and ink for ink catridges from, they did not know where to order if from either.

×

8 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Yes there is, I found something on amazon, here: Amazon com dell 3110cn belt. I hope this one helped you. have a nice day

Posted on Dec 07, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

Posted on Dec 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 28 Answers

Order Maintenance Kit (Dell UG190 Maintenance Kit)
Part Number: UG190
for Dell 3110cn / 3115cn Printers
Three piece maintenance kit.
Approximately 100,000 page yield.
Includes fuser, transfer belt and rollers.

Posted on Oct 19, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Had the same problem. i bought mine from www.libertytoner.com. they have the dell 3110cn/3115cn transferbelt units in stock and it shipped the same day... hope this helps out...

Posted on Nov 14, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Expert
  • 160 Answers

The Belt unit is referring to the transfer belt which must be replaced, for the 3110 the part number is HG432. Iteminc.com has these in stock and ships same day. Installing it is simple and doesn't require any tools. Here is a video that shows you how. Hope this helps and thanks for using FixYa

Posted on Jan 03, 2012

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Sound like printhead need to be replaced. take a look on amazon... Amazon com dell 3110cn belt. Have a nice day

Posted on Dec 07, 2014

It's the transfer belt. it's included in the fuser maintenance kit from dell

Posted on Apr 16, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Hmmm...that description sounds a bit odd. I have Dell service manuals, yet I find nada about a belt unit. can you tell me where in the printer that is located, and maybe I can get you an accurate readout

check your computer warranty here

Posted on Mar 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does PC life warning mean - message on Dell 2350dn?


it could be that the cartridge is nearing the end of its serviceable life, I assume PC stands for Printer Cartridge. You could try getting it serviced

Feb 12, 2015 | Dell Office Equipment & Supplies

1 Answer

I just replaced the Belt Cleaner Assembly in our Xerox Phaser 7800 as it was stating it was at 0% and PAST end of life. Now I have installed a new one, the same message is still up! Help!


It may be another part that is past end of life, The imaging unit may also need replaced, once a new part is installed the printer should pick-up on the new part (Except belts) and reset itself. Often this line of printer fails to reset after a new part is installed. Xerox offers little to now support on this error, except sending in for repairs. However many people have said turning the unit off, unplugging it, sometimes fixes this issue.
Others have stated the problem "Fixes itself" after a while.
In my experience, removing the cartridges or imaging units and reseating them can sometimes cause the device to reset but not always.

Nov 21, 2014 | Xerox Office Equipment & Supplies

1 Answer

How to sort a Belt drive close to life message?


This message starts to appear when the transfer belt has reached a pagecount of around 80,000 pages. The 'rated life' of the transfer belt is 100,000 pages, so it depends on how much you print as to when you will need a replacement transfer belt.

Still widely available, and really easy to fit ( it's a user replaceable part - no tools required, and the instructions are in the user manual).

May 01, 2014 | Dell 3110cn Laser Printer

1 Answer

Data mb-460 drum life


Yes,

That message indicates the drum is getting close to the end of life. The printer shows the message a bit before the end of life on the drum so you have time to order one before it goes out completely. You can get them from your office supply dealer or from Amazon.com

Apr 04, 2013 | Oki Electric Industry MB460...

1 Answer

What does a belt life ends soon mean, on a brother MFC 9440ch color laser printer?


Are you sure of the error message? The Brother printers that I have used have Drum Ends Soon and Change Belt messages.

The Brother MFC-9440CN has a belt that can be replaced. The Belt unit has an life expectancy of ~50000 pages. The belt unit is part BU100CL and costs a bit over $150 at office supply stores. Amazon.com and some other stores have the unit for under $100. http://www.amazon.com/Brother-BU-100CL-HL-4040CN-HL-4070CDW-Series/dp/B000SC245E is one source.

When the unit says Change Belt Unit, follow the directions from the manual's maintenance section to replace the belt unit. See page 178 (page 189 of the PDF) http://welcome.solutions.brother.com/BSC/public/files/dlf/doc002252/mfc9440_usa_usr_b.pdf . You have to remove the Drum and then the Belt Unit. Then slide in the new Belt Unit and replace the Drum unit. Then close the printer and turn it on. Finally reset the counter from the Machine Info sub menu (press Menu 8 4 and select the Belt Unit and press OK. Then press 1 followed by Stop/Exit).

If you mean the Drum Unit, that is part DR-110CL and costs over $175 at the office supply stores. Order this part when the Drum End Soon message appears and replace it if the print quality deteriorates (or when you have the new drum). The Drum Life is ~17000 pages. The steps start on page 166 (182 of the PDF). You need to remove the old Drum unit. Then remove the toner cartridges from the drum. Prepare the new Drum Unit, including putting the cartridges in the new Drum. Then replace the Drum unit and reset the counter.

I hope this helps.

Cindy Wells

Jun 04, 2012 | Brother MFC-8460N Laser Printer

1 Answer

Toshiba e studio 250 The print is comming out partially faded. The tona is full, so I am not sure what the problem is, any ideas please? Thanks Anuja


Hi

It might be one of the part life had ended like fuser drum unit life ends or transfer belt unit life ends. Try to check this parts in the LCD screen in LAN setting. or PART LIFE. See if how much percent is their life parts.

Replacing this parts would normal bring your print out to good printing.

Or adjust the contrast setting in the control LCD menu screen to darker setting to make print out more darker.

Jun 22, 2011 | Toshiba E-Studio 250 All-In-One Laser...

1 Answer

Dell 3110 laserjet printer, belt unit close to life


This message is displayed when the pagecount of the transfer belt is 80,000 (ish)+.

The rated life of the transfer belt in the Dell 3110/3115 is 100,000 pages.


After that pagecount the transfer belt 'expires' and no further printing is possible until the transfer belt is replaced.

Feb 03, 2011 | Dell 3110cn Laser Printer

1 Answer

There is a warning said : " fuser unit end". What is the problem for that printer HL-4040CN? Even after I changed the drum unit and belt unit, there are still 2 warnings appearing to ask for...


first you are talking about the FUSER END message that means you have to change the FUSER and as for the DRUM and BELT you have to RESET the TIMER to tell the printer that it has been changed as well as for the FUSER those are consumable parts they have a life and the printer is programed to tell you to change them after so much copies.

Good luck!

Jan 05, 2011 | Brother HL-4040CN Laser Printer

1 Answer

Transfer belt unit is out of service life


Epson C-900. There is a fuse in the photoconductor unit and the transfer unit. The photoconductor has a shorter life, so it can be a few years before the transfer unit goes end of life. I suspect the fuses are blown by the machine when the counters get to end of life limit set by the manufacturer. On both components, if the fuse is reinstated/by-passed, the machine will think it has a new part. Spare fuses are available for the photoconductor unit.

The fuse on the transfer unit is a green resistor on a small board behind a black plastic dust cover on the front edge of the transfer unit (remove 3 screws to access). Ask a friend who understands basic electric circuits if you are stumped at this point.

Of course this mechanism is there to ensure you enjoy high quality output from your printer and keep it in top condition. By over-riding the mechanism quality will deteriorate and risk of failure increases.

KAF2008

Jul 29, 2008 | Epson AcuLaser C900 Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

15,864 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98796 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...