Question about NetGear DG834G Router

1 Answer

Setting up netgear dg834gmodem router

I bought this modem router for my partner so she can get the internet to her laptop ive done what it said connect ethernet cable plug in power connect to phone line every thing was ok power light was on ethernet light was on wireless light was on dsl light was on but no internet light and when i go through set up on disc it sais cable not connected at the mo i have a speedtouch wired modem with tiscali please can you help thank you

Posted by on

  • deb6549 Aug 29, 2008

    just bought netgear dg834g modem router plugged everything in put the disc in etc .. but it comes up saying that there is no connection please check cables and i carnt get any futher on than that please help

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 73 Answers

U will need to call netgear get your isp or ther dns server codes they will tell u it and u will enetr in the network adpoters properties area ok thx nick

Posted on Mar 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ialso have suddenlink


2_11_2012_4_56_57_pm.jpg
How to Set Up a Netgear WGR614 V5 Wireless Router
Netgear routers--like all wireless routers--give you the opportunity to access the Internet with your laptop or wireless-adapted computer from virtually anywhere in your house within range of the router's WiFi signal. Though slightly different in appearance from other router models by Netgear, the WGR614 V5 acts similar in its setup process as others such as the WGT624 or WNR1000 series routers.
Things You'll Need:
Netgear WGR615 V5 routerNetgear resource CDEthernet wireBlue network wireModemComputer
1 Prepare to install the Netgear router. Log off and shut down your computer system. Turn your Internet modem off and/or disconnect its power supply from the electrical outlet. Take out the contents of the Netgear router box and verify that all the essentials are present: the resource CD, the yellow wire and the router itself.
2 Connect the Internet modem to the Netgear WGR614 v5 router. Locate the yellow Ethernet wire running from one end of the Internet modem to the computer's Ethernet port. Unhook the computer-end of the Ethernet wire and insert this end into the port on the router labeled "Internet." After inserting, confirm that the wire runs from the modem to the router.
3 Connect the Netgear router to the computer. Grab the blue cable supplied with the router. Securely insert one end of the blue cable into one of the four "LAN" ports on the router (the "LAN" ports are labeled with numbers from 1 to 4). Insert the other end of the blue wire into your computer's Ethernet port.
4 Start your network devices. Turn on or connect your Internet modem to an electrical outlet. Wait for at least two minutes to allow the modem to fully boot. Plug the Netgear router into the wall or electrical outlet as well, and wait one to two minutes. Turn on your computer.
5 Look at the Netgear router to verify that all lights are on. The "power," "Internet" and "wireless" icon symbols on the front of the router should be solidly lit. One of the four "LAN" ports should also be lit with either a green or amber color.
6 Insert the resource CD that came with your Netgear router to launch the "welcome" screen. Select "Router Setup" from the menu to begin the "Smart Wizard" setup application. Read and follow the setup steps, including naming your SSID (secure set identifier) or "network name" and setting a level of wireless security. Finish the setup process, ending with the registration of your Netgear router.
7 Verify that your Netgear router has been set up correctly. Open an Internet browser from both the computer that is connected to the router and on a computer that has a wireless card or adapter. Surf to your favorite Internet sites to verify your connection is working. Open your "network connections" utility on your operating system and make sure it shows that you're connected to your own wireless network.

Jan 09, 2012 | NetGear WGR614 Wireless Router

1 Answer

Have 2 computers connected to Netgear WGT624NA router via ethernet connectors and have operated well for over a year. Now have gotten DSL and have run phone line to modem and via ethernet cable have...


Have you tried to reset router. It has to be done in order.
1. unplug router
2. unplug modem
3. shut down computer and restart after waiting 1 min
4. after restarting computer plug power back into modem and wait for all the lights to start blinking
5. after the modem is working plug power back to router and plug in the computer with ethernet cable and make sure you have internet,
6. try to link up with wireless,
If this does not work you will have to setup the router for wireless if it is att wireless you will have to call them to give you the password to set it up.

Jan 10, 2011 | NetGear WGT624 Wireless Router

1 Answer

Hi my name is tam. I am using the Net gear WGR614 v5 and my laptop is using window 7. But i can't connect to internet via the wireless rounter netgear. The internet light was on but the wifi light is keep...


Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Apr 23, 2010 | NetGear WGR614 Wireless Router

1 Answer

Router setup


Make sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
You can do it manually without the CD.
Click Here for step by step by instructions

Jan 28, 2010 | NetGear WGR614 Wireless Router

2 Answers

How to connect Netgear to Time Warner internet modem? I have Netgear installed on my computer, and I have the internet modem plugged in to my computer.


Just disconnect the ethernet cable from the computer and put it into the slot called internet on the router then run ehernet cable from port 1 to computer.


Dec 05, 2009 | NetGear WGR614 Router

1 Answer

Could not make router to work, Netgear modem adding router.


i suppose you have to connect modem to router's "source" socket and modem to socket "in wall" then reset and reconfig router and you should be ok

Nov 10, 2009 | NetGear WGR614 Wireless Router

1 Answer

Cannot access internet with wireless router connected


powercycle the belkin router and modem and computer..

Jan 17, 2009 | NetGear WGR614 Wireless Router

1 Answer

Setting up Netgear Wireless-N router


try this plug up a line to laptop to modem to check to see if you can get connected if so then make sure you are on the same network and if so then call comcast to help you setup the laptop wireless settings in sound like the settings online doesn't have the laptop enable to accept the laptop

Dec 01, 2008 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Setting up a wifi router


Configure the router first using the desktop. Make sure the modem is connected to the Internet port of the router and the desktop to port 1. Just run the setup CD that came with the router and it will guide you through the setup process. You can also try to reset the router first by pressing the reset button at the back for 10 seconds then unplug the power to the router and the modem, wait for 30 seconds. Power on the modem first and wait for the lights to stop blinking, then the router. check if the internet works hardwired.

Hope that helps.

If not, tell us more. Who is your ISP (Internet Serivce Provider)? Is it a cable or DSL?

Jul 24, 2008 | NetGear WGT624 Wireless Router

1 Answer

Can only connect to LAN, no internet access


Check for a vaild gateway address on router,start.run.cmd> type in ipconfig.if you dont have a valid ip or gatway. try a powercycle,turn off modem and then router,wait about 10-20 sec and plug modem back in. check your ip and gateway check for a connection, if that dont work call netgear to see if u have a defaulted router, or take it back for new one if u still have a recicpt.

Feb 06, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
NetGear DG834G Router Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...