Question about Splendide 2000S Vented Washer/Dryer

2 Answers

Washer fills, drains, & final spin

Washer fills, drains, fills, drains, & does the final spin. It does agitate during wash, rinse, or dry cycle???
HELP
Thanks

Posted by on

  • 4 more comments 
  • GlenSharon Aug 30, 2008

    Fills, washer drum turns a few times, then drains out. While it's draining the dial is clicking turning around and around and clicking. I have had to stop it reset it and try again......several times the same thing happens over and over!
    I finally set it on the rinse cycle and it seems to be doing better. I know it's not fixed, but am happy the cycle will end so the door will open so I can get the clothes out of it.

  • Anonymous Mar 15, 2014

    washer fills with water then nothing. I move the knob to spin cycle and it will spin and drain. The wash cycle does not work. Help

  • Anonymous Mar 16, 2014

    model 2130

  • Anonymous Mar 18, 2014

    Washer does not spin or drain prior to rinsing.

  • Anonymous Mar 21, 2014

    washer will agitate and it will work in spin and rinse cycle but will not fill with water

  • Anonymous Mar 22, 2014

    i have tried to put on other programmes and still i does not spin

×

2 Answers

I had the same problem and ended up replacing the control board which solved it.  Contact Westland Sales at 800-356-0766 ext. 5 for tech support.

Posted on Jun 02, 2008

Make sure the tub us actually moving. Sounds like the belt may have come off. That is what has happened to me.

Posted on Mar 19, 2008

1 Suggested Answer

IB4G2008
  • 3587 Answers

SOURCE: Washer doesn't agitate

sounds like your washer went mellow on you(doesn't get agitated, right)?

ok. enough humor.

sounds like there's a problem with the motor/belt/control board in that order

Posted on Mar 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please describe a typical washing cycle to me on the RTW4440XQ Roper 3.1 Cu. Ft. Top-Load Washer, please.


The typical cycle is;
fills to selected water level
agitates wash cycle
drains wash water
spins wash cycle
fills to selected water level on rinse cycle
agitates on rinse cycle
drains rinse water
spins final time
end of cycle

Aug 08, 2011 | Roper Washing Machines

1 Answer

Kicking out water during wash cycle - spin instead of agitation


Hi,
Try these

  1. Check the drain hose, it should be at least as high as the top of the wash tub, about 38 inches.
  2. The drain hose must sit loosely in the house drain. Do not seal the air gap around the drain hose or a siphon will occur.
  3. Check the drain control lever
  4. Test the drain control coils
  5. Check the cam bar
pls rate my suggestion..

Jul 19, 2009 | Maytag LSE7806A Top Load Stacked...

1 Answer

Will not spin on any rinse cycle


Hi, This washer does not have a belt. While the washer is agitating, if you lift the lid will it stop? Some models will agitate but not spin if the lid is up. It sounds to me like the lid switch might be going bad.
If you will get me a model #, I can look this up for you and give you a better idea.

Vic

Jul 05, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washing machine does not drain during rinse cycle?


Turn timer to rinse cycle. let fill up and agitate. when it stops agitating it should pause then start to pump water out. After about 2 minutes it should pause for 3-5 seconds then start again and spin. If it starts the first time and never stops it will just continue to pump but no spin. The 3-5 second pause allows the transmission to shift to spin. If it does not do this the problem is your timer. You may need to do this a few times to verify the problem.

If that is not the problem it is likely that you need a new clutch. You will need a technician to install a new clutch for you

May 17, 2009 | Whirlpool LSQ9600L Top Load Washer

1 Answer

As washer was on final spin cycle it sounded like a belt came....


it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Apr 01, 2009 | Kenmore Washing Machines

2 Answers

Washer doesn't agitate


sounds like your washer went mellow on you(doesn't get agitated, right)?

ok. enough humor.

sounds like there's a problem with the motor/belt/control board in that order

Mar 13, 2008 | Splendide 2000S Vented Washer/Dryer

2 Answers

Won't Agitate


If you can hear the motor during the agitate cycle, the the transmission has stripped gears.

Dec 17, 2007 | Frigidaire FWS833A Top Load Washer

Not finding what you are looking for?
Splendide 2000S Vented Washer/Dryer Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Splendide Washing Machines Experts

Doug Adams
Doug Adams

Level 3 Expert

673 Answers

yadayada
yadayada

Level 3 Expert

60659 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Splendide Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...