Question about Bush 5693D 24" TV

1 Answer

Bush RFT TV

The colours on screen have changed with blue and green being the dominant colours now. There seems to be a lack of red ie, all people are now light blue. There seems to be a halo effect around the outside edge of the screen. I have tried reconnecting scart and changing setting on the TV but no joy. I'm now worrying that it's something more terminal!

Posted by on

  • 1 more comment 
  • 010471 Jun 02, 2008

    my bush 28" tv screen has become almost completely green and despite changing colour settings there has been no improvement. the set is less than two years old! any ideas please?

  • m_mandan Jun 22, 2008

    I exactly have the same problem.

  • G0uranga Jul 29, 2008

    My TV is only a few months old (but I bought it as refurbished on ebay). At first it was brilliant, now I get flourescent sort of green in most of the black areas and around people's faces. It is not getting any better. I can't afford another new telly. I wouldn't mind, but I gave my son's CRT to a charity and I never had any problems with it! Should have kept it. Ah, well.



    HELP!!!

×

Ad

1 Answer

Try the thermistor degauss coil,

Posted on Jul 27, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca d52120 need more green and red color


sounds like the Blue CRT drive has an issue which causes the blue to become dominate thereby limiting the red and Green CRTs from projecting normally. Is your screen full of blue?

May 23, 2011 | RCA D52120 52" Rear Projection Television

1 Answer

I hve a sansung 48 v monitor. the screen is very much redish


CRTs use 3 "guns" to mix the 3 "primary" colours (RED, BLUE, GREEN). One of the other guns has stopped working, leaving the RED gun as the "dominant" colour.

Spend $30, and buy a pre-owned 15" LCD monitor.
Or, spend $100, and buy a new 17" LCD monitor.

May 26, 2010 | SAMTRON 55V 15" CRT Monitor

2 Answers

My E771 monitor colors suddenly shifted with


Possibilities:
1. video-card gone bad;
2. video-cable gone bad;
3. video-cable not tightly-connected to CRT;
4. video-cable not tightly-connected to video-card;
5. "red" gun inside CRT gone bad.

Disconnect the video-cable from the computer, and try again to adjust the "red". If red-free, then it's time to responsibly recycle the CRT.

Reconnect & wiggle the video-cable, to see if that induces any "red" onto the CRT.

Connect the CRT to the VGA-output port on a notebook computer, to see if that video-card generates "red" as one of the primary colours.

Give the CRT a strong "whack" on the side, to see if "red" makes an appearance.

May 07, 2010 | ViewSonic E771 17" CRT Monitor

1 Answer

I have changed the IC's ,the convergence problem repeats..


in the back of the TV, there is a controller that you can use to manually set the strength and focus of each color.

Oct 20, 2008 | Philips 60PP9352 60" Rear Projection...

1 Answer

Bush RFT TV


The picture tube of the tv has 3 color in CRT Red, Green, Blue. The red cathodeof tv set has no function, its either the resistor become higt resistance, that why u need a repairman to replace it.

Apr 10, 2008 | Televison & Video

1 Answer

Colour problems with projector


In short If the reds show as red, The greens show as green & Blue shows as blue. I would say thats as good as it can project. It's hard to judge color without seeing it for ones self but usually DLP projectors that use a colorwheel do not have perfect color.

Feb 13, 2008 | Office Equipment & Supplies

1 Answer

Rca d61w20 dominate red & blue screen also very blurry picture


Red and blue present, but no green = bad green CRT is
best guess.Remove lower front panel = adjust screen and focus
controls for best pix..................T.

Oct 30, 2007 | RCA P52926 52" Rear Projection Television

1 Answer

Picture problems


CRT green gun is not working properly , maybe dry soldered or no green drive signal. Pink and red colour is due to missing of green colour.

Sep 09, 2007 | Sanyo DS27820 27" TV

1 Answer

RCA CTC203 no red colour


Did you change the resistor by yourself? I am not sure if your TV has manual adjust on the back of the TV that you can adjust. Some times turning the TV Off and unplug it from the wall helps because it resets the TV. Check your Back ground color and see what is the dominating color. Blue, Green or Red. If this doesn't work please call a professional to look at it.

Jun 18, 2007 | RCA F27649 27" TV

Not finding what you are looking for?
Bush 5693D 24" TV Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bush Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75898 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Joseph Hoffmann

Level 3 Expert

1753 Answers

Are you a Bush Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...