Question about Canon PIXMA MP600 all-In-One InkJet Printer

1 Answer

Help.. hey..I have a canon MP600 multifunctional..At the begining,it worked well,but now,it seems to have some problems.On the screen it sais that the magenta ink tank cannot been reconogized(U150 error).what should I do?please help.and thank you!

Posted by on

  • Anonymous Mar 17, 2008

    Same problem but with the leftmost (skinny) Black tank. (All the tanks are genuine Canon tanks.) Symptoms -- late in the boot-up after power-on, the yellow error light comes on and the U150 message appears. Bringing the tank assembly to the centre shows that the leftmost tank light is OFF (consistent with the U150 message). If I unseat and then reseat the tank, the tank light comes ON and the error light goes out, and most times I can then use the printer. Sometimes, however, it takes several unseat/reseat cycles before the printer will work.
    This error used to be occasional but now occurs on almost all power-ons.

  • Hege Mar 26, 2008

    yes, I have the same problem and its the black on the far left side. I´ve heard that it has to do with canons system to provide users to buy fake ink tanks, but now it seems that it doesnt even recognice its own??! And I dont think its fare if I need to buy a new ink tank when this one came with the printer and its almost full. And I was really careful when I first put it in not to touch the electrical contact. help me!



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Same problem   I brought a new ink tank and put it in and it went fine...I guess the first one was faulty...hundreds of pages later its going fine

Posted on Apr 03, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Hey there, I have the same printer.
Two ways - One is thru the PC from settings
Second one is going to the settings of the printer with the scroll and buttons and manually doing each of the processes in the list.
It begins with cleaning print head, etc.
-Hope I helped and regards, Eaten

Jul 25, 2013 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Error 6b10

Hi there!
Here's what you can do:
1. Press ON/OFF switch to reset the multifunction device 2. Press Stop/Reset and ON/OFF to reset the printer 3. Try to check for jammed paper. click this link and under service & support type paper jam 4. The MP600 may require repair
If you will still receive the message you can check this link for your model or contact the customer service
Hope this helps!

Mar 29, 2011 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

I am trying to find the manual for my Canon MP600 but cannot find it.

Download the manual from the following website

Sep 11, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

How do you scan 120 negs?

The MP600 cannot scan film or slides. Film/slide scanners need a light source to shine through the film to the scanner sensor. You can use a flat bed scanner with a light source such as the CanoScan 5600F, or a multifunction unit equipped with a backlight source such as the Canon PIXMA MP810, MP970 or MP980.

May 19, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

I have the same problem with a CANON PIXMA MP830

Hey! let me know what errors you're having, there's no Canon I can't fix...and Canon support is usually amazing. Sorry you're having a problem, but I can't help til you tell me what's happening. Thanks

Jun 25, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Difficulty printing

First of all, delete all the copies of that printer in the folder and try again. If possible delete them all and reinstall the printer.

Apr 21, 2009 | Canon PIXMA MP600 all-In-One InkJet...

5 Answers


when i turn on my mp600 canon printer i get the same error code 6A00! i cannot do anything with the printer, please help!

Apr 08, 2008 | Canon PIXMA MP600 all-In-One InkJet...

2 Answers

Canon pixma mp600

If its still under warranty send it back.
Solutions for error code 6800 Issue: Error code 6800 appears on the display (multifunction printers MFP)

1. Contact Canon for 6800 error - MP600 2. The MP600 may require repair

Oct 28, 2007 | Canon PIXMA MP600 all-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2012 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides