Question about Xerox XA7-172i 17" LCD Monitor

3 Answers

White monitor When I turn my computer on and then my screen, the screen goes white/pale pink from the right hand corner up to the left hand corner then stays white, I have to turn the monitor off and on and then eventually my blue screen comes on and its ok but its taking more goes all the time Im not great at understanding computers so any help would be greatly appreciated

Posted by on

  • sinatra May 19, 2008

    Yes, I have exactly the same problem. Screen comes up white. I have to leave it for 20 minutes to warm up and then start turning it off and on until the screen eventually fires up as perfect as the day I bought it 2 and a half years ago. The monitor works perfectly for the rest of the day until I turn it off ....... the next morning I have to start all over again. To me it seems similar to getting a flouresent strip light to come on when it has a dodgy choke .... hopefully there is a similar replacable component inside this otherwise excellent monitor?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My XEROX monitor does not receive signal from computer it display white color until 20 minutes after turn on.

Posted on Mar 14, 2011

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

See possible solution here:

http://www.fixya.com/support/t145392-white_screen_xerox_xa7_19i

Posted on Nov 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 151 Answers

You can degouse it.I think you placed your monitor in any magnetic field or near fan ac or any electric equepment.
Hope this be of initial help/idea. Pls post back as requested, how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FIXYA.

Posted on Mar 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagonal lines at 45 degree angle from left top to right bottom of screen


db:: 4.31::Diagonal lines on tm2 screen? fz - Hivmr

www.hivmr.com/db/fzap9jk8dp87mcjk3cc9jsp7fzxk7pz1
There are faint 45 degree diagonal lines covering my brand new tm2 LCD ... with some static looking diagonal lines going from bottom left to top right. .... DB:3.01:Dv6113 Us - Computer Freezes Showing Diagonal Lines On Screen aj ... Also there arediagonal lines that run across the screen at about a 30 degree angle.

3M Privacy Filter for Laptop diagonal-14.1" viewing screen ...

www.amazon.com/3M...diagonal-14.../B00006B8A9

Amazon.com, Inc.
Rating: 3.8 - ‎1,617 reviews
Amazon.com: 3M Privacy Filter for Laptop diagonal-14.1" viewing screen ... Premium 14.0 Inch Privacy Screen for Widescreen Laptop or Computer Monitor .... 3M™ Privacy Filters create a 30-degree cone of vision so on-screen data is .... You'll also notice a large "3M PF14.1W" printed in the top right hand corner of the filter.

FZ190: Faint Diagonal lines on screen? ' NotebookReview

forum.notebookreview.com > ... > VAIO / Sony

Jan 27, 2016 | Computers & Internet

1 Answer

How to turn off monitor


1. Go to the desktop
2. Right Click
3. On that list, you should click personalize
4. In the lower right hand corner, click Screen saver (It's in blue letters)
5. In the bottom left hand corner of the window that just popped up, click "Change power settings"
6. In the left side of the new window, (It's in the light gray area) click on "Change when the computer sleeps"
7. Then from here you can set when you want to turn off the display and or put the computer to sleep after how long you have been inactive.
8. Remember to click the "Save changes" button to save what you've done.

May 25, 2014 | Total Gym Cyclo Trainer

1 Answer

Contrast is pink. Cannot get it white.


PINK is a mixture of just two of the three "primary" colours.
WHITE is a mixture of all three "primary" colours.

So, your monitor is NOT producing one of those primary colours. or is not producing the right "mix" to get from RED to DUSTY ROSE to PALE ROSE to WHITE colours.

Jun 27, 2011 | Envision Computers & Internet

1 Answer

My monitor has turned a glaring pale pink. Any


Sometimes it has something to do with the integrity and robustness of the mechanical cable interconnection of motherboard/video card to monitor vga cable. Check that first. If that's not it, then think about new CCFl's being installed on your monitor. Bye for now. louie12fix on fixya.

Oct 11, 2009 | Computers & Internet

1 Answer

Screen background color turned pink


Power OFF the monitor before doing this. You don't have to power off the computer.

Your video cable is loose. Most likely on the back of your computer. Push cable in tight and tighten the thumb screws.

Turn ON the monitor

If this doesn't work, then (seriously) *whack* the monitor on the left or right side with the palm of your hand. If this corrects the problem it is temporary (you will need to replace the monitor or have to deal with a sore hand).

Hope this helps!



Sep 03, 2009 | Compaq 7500 17" CRT Monitor

2 Answers

Philips Unknown Problem


hi i am arun fr india

i have big problem my pc have been this setup entry key detected enter password to unlock the system...

how to slove this problem help me .... plz >>>....

Sep 13, 2007 | Philips 190B6CB/27 19" LCD

1 Answer

Screen split into 2 colours - vertical split


I think it is degaussing problem if any thing is lying which has magnet please remove it. &then put of monitor for 15 minutes & then put on again.do not move when it is on. please let me if it gets ok good luck

Sep 09, 2007 | Philips 170B4MG 17" LCD Monitor

5 Answers

Monitor screen turned into pink


A defective monitor cable can cause the monitor to turn pink.

May 13, 2007 | SAMTRON 55V 15" CRT Monitor

Not finding what you are looking for?
Xerox XA7-172i 17" LCD Monitor Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Computers & Internet Experts

Jack McCann
Jack McCann

Level 2 Expert

117 Answers

Outback Jack
Outback Jack

Level 3 Expert

1150 Answers

Steven's...
Steven's...

Level 3 Expert

421 Answers

Are you a Xerox Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...