Question about Kenwood KM800 Major Classic Stand Mixer

4 Answers

Kenwood chef 700w

My kenwood chef 700w has decided to stop working after 15years of problem free operating. plug it in and power on then turn speed dial but nothing happens. any ideas of what is wrong.

AFTER MORE THAN 10 YEARS OF NO PROBLEMS, MY KENWOOD MAJOR SUDDENLY STOPPED. NO POWER, OR MOVEMENT. SHOULD I JUST HAVE IT SERVICED PROPERLY, OR COULD IT BE FAULTY?

Posted by on

  • Anonymous May 19, 2008

    My kenwood chef has just stopped. Happened before but reset button worked - this time no joy.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 11 Answers

IT NEEDS A REPAIR KIT.I CAN DO THIS. OR SEND A REPLACEMENT REPAIRED MOTOR FOR £25 PART EX FOR YOUR MOTOR.PLUS POST 07507400101. ****

Posted on Apr 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I thought my dial had stopped working and actually it was the power lead! It had slipped out slightly when I must have moved it!! So pull the lead out and then fix it in securely and try it again

Posted on Mar 26, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Hi,

Try to reset the machine, if you look in front of the machine when it is up, you will see a green button just press it. If that not work then the electric board is gone.

Posted on Jul 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

I think its the control modul that has stoped working ,sadly.

Posted on Jul 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello - I need the service manual (preferably with exploded diagram) of the Kenwood Chef KM201. Can anyone help me?


Have you tried here? http://www.u-manual.com/download-manual-now-for-free-10/267574/mixer-kenwood-km-201-chef.html

Dec 06, 2014 | Kenwood Chef Major A701 A901 Cm170 Km201...

2 Answers

Kenwood Chef KM400 motor speed is too slow


A failed SCR or triac will not always show visually any sign of failure. Chances are good that is all that is wrong. If mixer had been plugged in when it got wet, that is all it takes. Also check the transient voltage supressors if the chef has them. They would be identified on the circuit board. as TVS or MOV along with a number. Only number to use is the one on the component.

If you can find ratings for the old devices, just matching the basic ratings should do. Just guessing, but the SCRs should be 20 amp and 400 volt, If the old ones are a lower rating than my guess, there is no problem with using the higher ratings, if my guess is low, go with the original's ratings. Manufacturer of device does not matter as long as ratings are at least comparable.

Jan 19, 2012 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

Kenwood Chef - slowest speed


if you have max speed you have to replace the .1uf capacitor the 2 spring loaded screws serve far fine adjustment

Feb 02, 2009 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

Kenwood acessories


Hello. your Kenwood Major is A707 ?

the new attachment for front and high speed outlet, not fit in A701/707 ..

Please visit our web site Kenwood Chef Restore in download section. you can download the compatibility of attachments
Regards

Jan 06, 2009 | Kenwood KM800 Major Classic Stand Mixer

1 Answer

Speed control not working


What model is your Kenwood ? to Kamalsalman

A901 models change triac and capacitor .. or centrifugal broken

also check if another's components is faulty.

Kenwood Chef Restore

Dec 22, 2008 | Kenwood KM800 Major Classic Stand Mixer

1 Answer

Kenwood chef A901, not working


Found a kit on ebay for 9.99 which fixes the speed cntrol problem on 901 chefs do a search for kenwood motor repair comes with instructions you would need to be ok with a soldering iron

Dec 14, 2008 | Kenwood KM800 Major Classic Stand Mixer

2 Answers

Difference Kenwood Chef A701 and Kenwood A901


Hello.

the difference between A701A and A901 is :

high speed outlet
slow speed outlet

planetary hub is similar . A701A, A901 and KM series

A701 Different planetary hub and fit different tools.

is not same A720 and A920 A7 = A701/A
A9 = A901 and KM

In our web site Kenwood Chef Restore in Downloads section.
you can download the compatibility of the models A700, A701 , A900 and KM series .

Regards

Oct 02, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...

3 Answers

Kenwood Chef A701 Variable speed controller malfunction. Appliance only operates on maximum speed.


the solution its change the capacitor or triac, normaly problems in models A701 or A901 old motors

regards
kenwoodchefrestore.co.uk

Aug 07, 2008 | Kenwood KM300 Chef Stand Mixer

2 Answers

Kenwood chef 700w


I hope you didn't buy a new one, ours stopped last week after 25 years. All that was needed were new brushes for the motor. Anyone with a screwdriver could replace them. 4Kenwood had the parts to me in a couple of days.

Jan 07, 2008 | Kenwood KM305 Stand Mixer

Not finding what you are looking for?
Kenwood KM800 Major Classic Stand Mixer Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Food Mixers Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Treefrog15
Treefrog15

Level 2 Expert

127 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Kenwood Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...