Question about Fuji FinePix 6800 Zoom Digital Camera

1 Answer

Card Not Initialized Error

After switching on in either Photo or Playback mode, I have recently been getting an error message 'Card Not Initialized' for all my Cards even though they can all be read in the Card Reader on my Computer. Thus they are all formatted and, indeed, some contain photos which can be read and displayed via the Computer.

Any ideas?

Posted by on

1 Answer

Get the photos you want to keep off the card, and reformat it in the camera. Just deleting pics won't help. More than likely corrupted memory, and needs reformatting, Has worked for me several times.

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Problem with new memory card


Hi,

I read an article about the same problem.....
Ill tell you the information about it.....

There are few situations when you find that your memory card is not functioning as expected and instead of data, you are getting few error messages:

· “CARD ERROR”
· “ Memory Card Error”
· “Card Not Initialized”
· “Read Error”

Display of either error message forces the user to think of solution as the affected memory card may be the house of the relevant digital data including photos, videos and audios.

Most of such error messages are curable through formatting the card.
As you said you have tried this already but no success......

So your card is suffering from the problem that the card is corrupt harshly.

This is the worst defect in the memory cards......So better get it changed..

The memory card corruption reveals that the data will remain inaccessible as formatting has failed to cure the issue. So the best deal would be to have photo recovery software. Photo recovery is also required in case of formatting success.
Picture recovery is quite practical through photo recovery software which benefits the users through their scanning ability and power to address each specific case of photo loss.........



Hope my info helps you.........
Thanx

Oct 07, 2008 | Fuji FinePix A605 Digital Camera

1 Answer

Card Not Initialized!! Fuji FinePix 2600 Zoom Digital


Are you using the camera to format the card ? I had a similar problem with a 3V 16MB card in my Fuji MX1200. I used the "Format" capability, oddly located in the "Trashcan"/erase mode, but it "initialized"/formatted the card with no problems or error messages after that. Hopefully you have a similar format function on your camera. The URL I'm referencing here is for the MX-1200, but you may find your camera elsewhere on this excellent site (not mine).

Aug 25, 2008 | Fuji FinePix 2600 Zoom Digital Camera

1 Answer

Card not initialized


Try removing card and cleaning contacts with a soft dry cloth.

Reformat and try again.

PDF manual can be downloaded if you do not have printed copy
http://www.fujifilm.co.uk/consumer/digital/digital-cameras/legacy-cameras/finepix-a330-zoom/Support

Error messages and possible solutions to try are given in the manual

Aug 21, 2008 | Fuji FinePix A330 Digital Camera

2 Answers

Dimage Z3 System error


plug it in, right click on it in my computer and select format, tick the quick format box and start it up! this will sort it out, i believe the problem is caused by incorrectly disconnecting the camera from a pc/laptop, so when you next disconnect make sure you safely remove it (right click in my computer,select safely remove)

Jul 01, 2008 | Konica Minolta DiMAGE Z3 Digital Camera

1 Answer

Having to format picture card evertime turned on Card not initialized


plug the camera into the usb cable or use a card reader and reformat thru your computer.

Mar 25, 2008 | Digital Cameras

1 Answer

Card not initialized


MENU --> SETTINGS --> FORMAT --> YES that'll do it

Sep 05, 2007 | Fuji FinePix A345 Digital Camera

6 Answers

Error message on camera "Card not initialised"


I had a similar issue with my Fuji E500. I had been working with it on my Mac, which automatically brings up iPhoto when it's plugged in via the USB port. When I removed the camera from the USB port, it turned on with a Card not initialized message. If your situation was similar to mine, here's how I fixed it: Plug the camera back into the USB port and turn it on. When iPhoto loads, Got to finder and select Eject (unknown) device. Then, when you disconnect the camera and turn it on, the message about not initialized doesn't show up and you're back in business. I hope this helps.

Jan 24, 2007 | Fuji FinePix E500 Digital Camera

Not finding what you are looking for?
Fuji FinePix 6800 Zoom Digital Camera Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...