At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
dealer parts only. if you go with a aftermarket or something from the hardware store you might have issue's. your better off getting them from the dealer. but you can if you like to use bolts from a hard ware store. just make sure they are 8.8 hardened bolts. good luck
Every 600 miles or 1000 km. Your motorcycle’s Owner’s Manual will have directions. You need to check the tension at several points along the chain’s travel around the engine and wheel sprockets. The tension should be set so that the loosest spot and the tightest spot are still within the slack tolerance specified in the owner’s manual. If the tightest spot is at the tightest allowed and the loosest is beyond the tolerance then it’s time to get a new chain and sprocket set. ,
×