Question about Sony PlayStation Portable (PSP) Console

1 Answer

On off switch


i have exchanged 4 play station 2 machines because the on off switch has
failed i am wondering if their may be a problim.please let me know what the
answer is.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

The on/off switch of a ps2 somtimes can get dissconnected from the power wire...this somtimes is caused becase the ps2 could have been used for a great amount of time,the ps2 could also be damaged from accidental falls or things related to that.when you exchange the ps2s you probobly get used ones wich are at higher risk of this happening because they probly been used for a great deal of time..i have had the same problem in the past twice

Posted on Mar 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the time on a BUSH CCR30ii docking station


Set time with the ccr30ii turned off. Use Set Time button and tune/skip control arrows. Use Time Set to cycle through the hours and minutes. Do the same for setting alarms. Not an easy item to get info on. It is NOTHING like the RCA model above. It is a touch control AM/FM radio alarm with two iPod docks which can be switched to play from each. The radio tends to fail It is disabled when iPods are connected, so it may be something to do with the circuitry that does this that stops the radio working. A good item which can be bought very cheaply now.
ba673b77-121b-4f32-9fdd-72c624495f8a.jpg

Feb 27, 2012 | Audio Players & Recorders

Tip

PS3 Has no Video - Simple fix!


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

on May 13, 2010 | Video Game Consoles & Games

Tip

How to change or reset PS3 Video Display Mode


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

on Mar 12, 2010 | Video Game Consoles & Games

1 Answer

Comm error 442


From the HP website:

420 V.34 negotiations have failed from the originating machine during phase 4. Phase 4 occurs after V.8 and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Solution:

Reattempt the fax reception at a different time when telephone line conditions have improved. 421 V.34 negotiations have failed from the originating machine during phase 3. Phase 3 occurs after V.8, before phase4, and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Solution:

Reattempt the fax reception at a different time when telephone line conditions have improved. 422 V.34 negotiations have failed from the answering machine during phase 4. Phase 4 occurs after V.8 and before the first T.30 frames are exchanged.

Solution:

1. Reattempt the fax reception at a different time when telephone line conditions have improved.

420 V.34 negotiations have failed from the originating machine during phase 4. Phase 4 occurs after V.8 and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Solution: Reattempt the fax reception at a different time when telephone line conditions have improved.


421 V.34 negotiations have failed from the originating machine during phase 3. Phase 3 occurs after V.8, before phase4, and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Solution: Reattempt the fax reception at a different time when telephone line conditions have improved.


422 V.34 negotiations have failed from the answering machine during phase 4. Phase 4 occurs after V.8 and before the first T.30 frames are exchanged.

Solution: 1. Reattempt the fax reception at a different time when telephone line conditions have improved.

Jul 25, 2011 | HP LaserJet 3050 All-In-One Printer

1 Answer

Hi, was just wondering how to enter a security code after the battery has been recharged? It is for a Blaupunkt Verona CR43 [1994]. I have the 4 number code, but don't know how to enter.


Blaupunkt Verona CR-43 Code Entry Instructions

Turn on the radio, the display will show 'COD'

Press preset [ 1 ] repeatedly for the first digit followed by [ station + ]
Press preset [ 2 ] repeatedly for the second digit followed by [ station + ]
Press preset [ 3 ] repeatedly for the third digit followed by [ station + ]
Press preset [ 4 ] repeatedly for the fourth digit followed by [ station + ]

Finally press the [ station + ] button to save.

Feb 10, 2011 | Car Audio & Video

1 Answer

Ps3 broken


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

Nov 06, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Compaq TFT 8020 Display Problim


have you tried going to menu and setting back to factory defaults? also, disconnect power cable and leave unplugged for 1 minute. Plug back in then see if problem is still there. Otherwise, something is wrong with the monitor that will need serviced or exchanged.

Jun 24, 2009 | Compaq TFT8020 (White) 18" LCD Monitor

1 Answer

Hello We purchased the Play station 2 game Heroes of Might and Magic (Quest for the Dragon Bone Staff). The back, of the game cd is blue. When we put it in the play station 2 we get the message disk...


If other games work fine on it, then the problem is with the game. If it is new, I would try to exchange it. If it is a used game, I have found that some of the used game stores can buff/resurface the disk for a small fee. The place I use charges $3.00 per disk. They can fix computer games and DVDs and all kinds of games.

Aug 22, 2008 | Video Game Consoles & Games

1 Answer

New to exchange server 2003


Hello there!
First things First!
1) you always going to have problems with exchange servers, or migrations. ** systems are not perfects**
2) You can migrate the emails to the new server, but, if only are in the correct version of Exchange 2003.
3) if backup is damage or fail, you lost everything.
4) try to reinstall the Server, and all utilites, is better, I know takes more time, but is better because you created yourself.
I suggest you to install from scratch!
Good luck

Feb 24, 2008 | Computers & Internet

2 Answers

ACER ASPIRE 3690-2363


restore your machine to a date everthing worked fine and do it from saafe mode

Jan 20, 2008 | Acer Aspire 3690-2196 Notebook

Not finding what you are looking for?
Sony PlayStation Portable (PSP) Console Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Iron
Iron

Level 3 Expert

3018 Answers

shaun taylor

Level 3 Expert

1454 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...