Question about Panasonic DMR-E85H DVD Recorder

2 Answers

Will not Power On nothing in Display Window

Has worked for years, now it will not even power on, No Clock no please wait, nothing displays if I unplug and plug back in.

mail any response

kcjanssen@cox.net

Posted by on

  • 1 more comment 
  • Anonymous Mar 13, 2008

    It powered on by itself and said "please wait". Then it shut off and after a minute or so it powered on by itself and said "please wait". Then shut off by itself and stayed off. Now we are unable to use our unit. We have tried new batteries in the remote, manually tried to turn the unit on with power button for 5 seconds, 10 seconds, 15 seconds, we unplugged and replugged the power cord--------Nothing!!! Any help would be appreciated. Thank-You!

  • Boogie Benny Oct 19, 2008

    Front panel display blank on phillips DVD recorder

  • Anonymous Nov 15, 2008

    unit about 2years old,hardly used, will not power up, no display, changed fuse, unplugged, plugged back in still nothing!!!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Bad power supply?

Posted on Apr 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Read this solution. It will be up to you how much you want to spend to get it fixed.

http://www.fixya.com/support/t216825-dvd_recorder_frozen_please_wait_display

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the battery to operate the clock when the power is off. I have the battery in correctly, but when the power is off the clock goes off?


I just read the manual an I am not sure it does. The manual says nothing about that. My clock does the same when power fails. Comes back to correct time when power returns. I miss that on my older clock. Display never went out even during power outage. You can call Phillips an ask or email. It is on there site.

Jan 27, 2015 | Philips Aj 3540 Big Display Clock Radio

1 Answer

Sharp Carousel II (R-9H83) loses clock, digital display dims


I think there are some electrolytic capacitors in the power supply to be replaced.Because there are relatively few, it would be good to change them all for more safety

Jun 02, 2014 | Microwave Ovens

1 Answer

Timex number t235 clock radio, how do I set the time


easiest way to set clock time. Remove AA battery's if installed.
Unplug Clock from AC. Wait a few seconds. Then replug clock into AC power. Clock will now flash 12:00. Press hours button until correct time is set PM has led on AM has Led off. Set minutes to correct minutes. Then press alarm reset / power/mode button. Wait a few seconds and display will show correct time. Now you can put the AA batteries back in.

Apr 30, 2014 | Timex T065s Solar Powered- Radio...

1 Answer

After a power outage of approximately 45 minutes i have no display


Hello
There is a Lithium battery inside your clock to get a backup even the power is interrupted for a long time. This battery may last up to 3 years eventhough there is no power to the device. If this has gone weak, the backup fucntion will not be. so check this battery.
Just reset the device. It will make it work properly. To reset the clock after total memory loss; do the folloing.

[1] Connect the radio to your AC outlet and let the clock set itself.

[2] Depress the MONTH/DATE and TIME buttons together. The display will change
from 'Time'to 'Year'

While holding the MONTH/DATE and TIME buttons, press the SET + button
to set the display to the correct Year, then release the buttons
OK.

Jul 24, 2011 | Emerson Smartset Clock Radio

1 Answer

The alarm display in the lower right corner on model #RC40-A keeps blinking and will not stop. This happens with both wake 1 and wake 2 options. I fixed it once by unplugging the unit but it this did not...


Hello
Just reinstall the battries and adjust the time once again.

Battery back-up operation

* This clock radio is equipped with

a memory holding system that can

be powered with 2 "AA" batteries

(included). The power failure

protection circuit will not operate

unless battery is installed.

* When normal household power

is interrupted, or AC line cord

is unplugged, the batteries will

power the clock radio to keep

track of time and alarm settings

programmed into memory.

* When the battery backup functions,

the digital display will not light,

however, the function of alarm

still occurs during the power

interruption if remaining battery

power is adequate.

* Normal operation will resume after

AC power is restored so you will not
have to reset the time or the alarm

To install batteries:

1* Remove battery compartment door

(located at the bottom of the radio)

by applying thumb pressure to the

tab on battery door and then lift
the door out and off the cabinet

2* Insert 2 AA batteries (included).
3* Replace the compartment door

Replace batteries every year.

Power is fed to the unit even

when it is not functioning. To

cut the power supply off, the
power cable must be unplugged
OK.

Jul 10, 2011 | RCA Rc40 Clock Radio

2 Answers

How do I get my Panasonic Inverter microwave out of demo mode? I think my toddler might have hit something to put it in demo!


Hello Two options to try: a) Press the Clock / Timer button 3 times b) Unplug, wait a few seconds, then re-plug to power up with the factory settings. You will need to reset your clock and any favourite settings.
This should work with all Panasonic Microwave models.
Good luck

Aug 10, 2010 | Panasonic NN-H275 Microwave Oven

1 Answer

I am receiving the same error message on the display window


Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information.

Function key shorted or stuck :
Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).


F1 touch pad / ERC test This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Sep 12, 2009 | Maytag MER6769 Gemini Electric Kitchen...

1 Answer

Display area and clock will not re-set on Electric Range


on any appliances need to know the model and serial num some problems are model specific

Dec 28, 2007 | Kitchen Ranges

3 Answers

Sony demo


Had the same problem. The display of the home cinema system kept showing "sony demo". I went to the system menu and reset all settings to factory!

Nov 20, 2007 | Sony CMT-M100MD\W CD Shelf System

Not finding what you are looking for?
Panasonic DMR-E85H DVD Recorder Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...