Question about Bose 3 2 1 GSX System

1 Answer

My remote suddenly does nothing

Are there codes that can bring it back, I'm not sure why it died,the unit still works on it's own

Posted by on

  • 2 more comments 
  • brian57 Mar 12, 2008

    I'm lost why the remote just stopped working

  • askanne Sep 02, 2008

    My remote was working fine but then it died I tried new batteries but nothing. Now what? This is the Bose remote. I can adjust from the unit itself but can't from the remote.

  • jag3148 Oct 15, 2008

    I have the Bose 321 GSX System and my remote suddenly stopped working. I can use the system by accessing the buttons on the unit, but the remote doesn't work with it. I have changed the batteries but it doesn't seem to help. I could use any suggestions that anyone might have.

  • Anonymous Jan 25, 2009

    The remote just stopped working. Changed the batteries and nothing. The red light on the remote does not light and it does not work the unit.


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

This may sound stupid but have you replaced the batteries in the remote? In either case if the remote is a universal remote (has different buttons usually across the top to select different devices) then the manual should give codes to reprogram it. If you cannot get it working with new batteries and reprogramming then the remote might have gone bad. If the remote does appear to be bad then I would just buy a new universal remote and program it for your equipment since they are not very expensive.

Posted on Mar 13, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a lg smart tv and when I switch on the sky hd box the remote work very slowly and then dies when it warms up

Check you remote battery and the connection. You may have to bend the tabs back a bit to ensure a good contact.

Not sure if you are describing the TV or the Sky HD Box remote.

Mar 16, 2015 | LG Televison & Video

1 Answer

No buttons work on LG 47LG5000. Neither remote nor the TV side buttons work but I can access all features by holding down 2 buttons for 15 seconds (eg. MENU and INPUT held together first brings up the...

check to make sure you have power to unit. If you do you may have a internal power problem. Have you gone thru a recent lighting storm? If so see your home insurance co. For coverage to repair or replace unit.

Feb 07, 2014 | LG Televison & Video

1 Answer

Panasonic dvd /vhs recorder

unplug it again.. plug it back in and take any dvd/tape out of it..go to the setup menu and let it reprogram any should start working once that part is done.. if not go find another unit at a resale shop..

Jan 20, 2014 | Televison & Video

1 Answer

I keep getting this message from my computer when I turn on my Canon MP160 printer: Windows has stopped this device because it has reported problems. (Code 43). It was working perfectly a few days ago then...

Code 43 is the death code - the unit that is generating it has stopped responding to the commands from the pc, it's dead and nothing will bring it back to life.
Nothing left to do but buying a new printer.

Apr 07, 2011 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer


Take off the battery, open the back of your remote, lift the circuit board, clean the green painted part with cotton balls slightly damp with rubbing alcohol as well as the black thingy behind your remote pad, let it dry put it back together, replace with a new battery and try if it works.

Jun 12, 2010 | RCA RCU403 Remote Control

1 Answer


Your probably got a blown fuse, You might want to unplug it pop off the cover and check the fuse. if its blown carefully take it out and bring it down to radio shack for a replacment.

hope that helps you out please to forget to rate.

Apr 05, 2010 | GoVideo D2730 DVD Player

1 Answer

3 Chamberlain liftmaster openers suddenly won't accept remotes farther than 2' from antennaes. I cycled power on one of the units, erased all remote codes and tried to add remotes back in one at a time...

With multiple units, the possibilities are few. One is weak batteies. I am sure you have tried new ones in the remotes.???

Another thing is interference from another source. These operate in a band above 300 MHZ. A strong signal COULD cause the remotes to have to be very close tot the receivers to overide interference.

Aug 24, 2009 | Televison & Video

2 Answers

Doorbell doesn't work

Have you tried to bring the remote (Push button) into the house and go to where the receiver is located and see if it works. It can be hard to see the battery polarity positions in the remote. Check to be sure that the battery is in correctly. If you cannot bring the remote into the house, try relocating the receiver to a receptacle closer to the entry. If all this fails, try buying a replacement remote (button) and matching the code pin settings.

Jan 16, 2009 | Desa International White Wireless Plug In...

6 Answers

Sony RM-ASP001 for 400 disk changer stopped working

Try the command code switch. I recently had a similar problem when my remote suddenly stopped working. It worked fine one time but nothing the next time I tried it.

I checked the emitter with a digital camera and found it was not working. I did the remote reset (remove batteries and push all the buttons twice, reinsert batteries) and the emitter was now working. However, the remote would still not control the base unit. I did the remote base code reset (push power, volume and TV/DVD buttons together) but this did not help. I then checked the command code switch. This is a small three position slide switch located in the battery compartment on the remote. I slid the switch back and forth several times returning to the default number one setting where it was before. I did not change anything on the base unit but the remote now worked.

Hope this helps.

Dec 23, 2008 | Sony RM-ASP001 Remote Control

Not finding what you are looking for?
Bose 3 2 1 GSX System Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides