Question about Projection Televisions

1 Answer

NEED COLOR DISC RED GREEN BLUE CAN YOY HELP - Projection Televisions

Posted by on

  • epuig19 May 17, 2008

    colors out of tone besides resetting the colors several times.green color all over

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can use a samsung colour wheel on the Sagems (Part no.BP96-00250AT) and remove it from the Samsung mounting. There is a black 'flag' on the motor body that tells the TV where the colour wheel is. This is different on the sagem but you can just peel it off and draw a mark with a permanent marker pen in the same position as the old unit. I've replaced mine on HD-D45 recently. Works perfectly

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The colors aren't matching up I have green semi


Yoy have convergence issue with tv,try the magic focus/touch focus or manual adjustment in the menu under convergence, if can't be adjusted then your convergence ckt is the problem,you will need a tv tech to repair it.

Mar 19, 2010 | Mitsubishi VS-50605 50" Rear Projection...

2 Answers

OUR HITACHI 50V500A HAS COLOR PROBLEMS WE MOVED IT


This is an LCD rear screen projection TV. There is a Red, Green and Blue LCD pallet that is mounted on what they call an X-cube. If all you are getting is Red and green then something happened to the blue pallet. Either the Ribbon connector came off or is loose or something worse. How hard did you mover it?
Another thought. How is it hooked up. If component then this may be the issue as component video connections are Red, Green and Blue. Just a thought.
Let me know.
Blessings always,
A/V Media Tech Guy

Nov 30, 2009 | Projection Televisions

2 Answers

No Red color at all. The convergence feature does not work either. Lots of green and blue RCA Model D52W59


Red color gun has failed, which will make the picture over saturated with the other two colors(blue,green) the bad news is the three color guns need to be replace in a set(all at the same time) because if you only replace the red it will over saturate the older blue, green guns then your picture will be mostly red.Unfortunently in most cases it's not worth the investment, better off to purchase a new tv. Good luck !

Nov 28, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

No red when hooking up component cable for dlp hd tv. Only blue and green colors show on hd component input for charter hd cable box. Are there any internal adjustments that need to be made through either...


Check the red cable this is where the red comes from, you may have a bad cable, maybe use the blue or green one just to see if the red will come through, it can be the cable box or the tv or the cable itself.

Nov 03, 2009 | JVC HD-61Z456 Television

1 Answer

Blue and red colors are seperated on tv screen


problem with unit is convergence-find that in the menu-try to adjust red untop green then blue ontop green.if they will not adjust gonna need parts-try to adjust it .if you need more help please list the model number

Sep 07, 2009 | Projection Televisions

1 Answer

No blue just red and green tint


adjust the blue bias on the high voltage block .
it has focus and bias for all three colors

Dec 26, 2008 | Samsung PCL5415RB 54" Rear Projection...

2 Answers

Picture calibration settings for 42lg70


Picture Menu
Picture Mode: Expert1
*Backlight: 16
*Contrast: 83
*Brightness: 53
Sharpness: 50
*Color: 55
*Tint: 0
Expert Control
  • Fresh Contrast: Off
  • Noise Reduction: Medium
  • Gamma: Medium
  • Black Level: Low
  • Real Cinema: On
  • TruMotion: Low
  • Color Standard: HD (N/A w/HDMI)
  • White Balance: Warm
  • **Method: 10-Point IRE
    • 10 IRE
      • **Red: 1
      • **Green: 2
      • **Blue: -16
    • 20 IRE
      • **Red: -6
      • **Green: 0
      • **Blue: -7
    • 30 IRE
      • **Red: -5
      • **Green: 0
      • **Blue: -4
    • 40 IRE
      • **Red: -8
      • **Green: 0
      • **Blue: -4
    • 50 IRE
      • **Red: -4
      • **Green: 4
      • **Blue: -4
    • 60 IRE
      • **Red: -6
      • **Green: 6
      • **Blue: -5
    • 70 IRE
      • **Red: -8
      • **Green: 3
      • **Blue: -10
    • 80 IRE
      • **Red: -8
      • **Green: 7
      • **Blue: -16
    • 90 IRE
      • **Red: -9
      • **Green: 5
      • **Blue: -18
    • 100 IRE
      • **Red: -10
      • **Green: 4
      • **Blue: -9
Color Management System
  • Red Color: 0
  • Red Tint: 0
  • Green Color: 0
  • Green Tint: -15
  • Blue Color: 0
  • Blue Tint: 11
  • Yellow Color: 15
  • Yellow Tint: 2
  • Cyan Color: -15
  • Cyan Tint: 0
  • Magenta Color: 0
  • Magenta Tint: -1

lg70 nice tv excellent processor just to bad there is no intensity control on color management oh well still better than what the three s are pushing block out the hype lg will be number 1 in a few years haters are starting to come around and well leds coming,

p.s. i dont work for lg just tired of losers bashing stuff because they dont own it.
im isf certified those settings are right on the money straighter than a ruler

Oct 05, 2008 | Projection Televisions

2 Answers

Colors off. blue and yellow not lined up


try to set the convergance if you cant you can adjust the color tubes from inside the tv but have to be very careful to do this. There is actually only 3 colors in the tv red, blue green so I would say your blue and green need lined up

Sep 30, 2008 | Projection Televisions

2 Answers

Tv problem


seems like your tv got convergence problem . try setting up the convergence , use remote . if it does not help you may need to change convergence ic * 2

Oct 01, 2007 | Panasonic PT-47WX49 47" Rear Projection...

2 Answers

How to adjust red blue green


if ur in service mode already..turn down all drive.green first turn it up until the desired intensity is achieve.then blue all the way until it almost blend the green.u must not see one color either too much green or blue.turn up red now,let it blend until u see a perfect black and white.note:make sure that the color level is set to minimum and tint to center. ihope i help u..

Mar 20, 2007 | Toshiba 43H71 43" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...