Question about RCA RP5440 Clock Radio

2 Answers

Sunshine Symbol on Display?

What does the sunshine symbol on the display indicate?

Posted by on

  • cwar1127 Dec 08, 2008

    The time just keeps flashing and is not correct...time zone is also not correct?????????

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The sunshine symbol on the display indicates that the daylight savings time is turned on. there is a switch on the back that controls it. when the switch is off, the light is off and the time displayed will be an hour earlier.

Posted on Mar 07, 2009

DST - There is a switch in the back.

Posted on Mar 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the time on Timex T231 clock radio?


Setting The Time of T231
NOTE: The time can only be adjusted when the clock radio is in the OFF mode. If the radio is playing, press and hold the MODE/ALM RESET button until the display briefly shows 'OFF' and then reverts to the time.
1. If the display is flashing, press the HOUR / REV button to advance the display to the correct hour. If the display is not flashing press and hold the CLOCK button until the display begins to flash, then press the HOUR / REV button to advance the display to the correct hour. Observe the PM indicator to confirm that you have set the hour correctly. If the PM indicator is 'On' the hour on the display is PM. If the PM indicator does not appear the hour on the display is AM.
2. Press the MIN / FF button to advance the display to the correct minute.
3. When the correct time is flashing on the display press the CLOCK / PRESET button once more. The display stops flashing and the clock begins to run.

Oct 01, 2014 | Timex Audio Players & Recorders

1 Answer

How to set time on model HD211B clock radio


1: Remove screw from top back of radio and carefully lift lid that retains buttons. Might be a good idea to take a pic of buttons so they don't get mixed up as they will just pop off at this point.

2: On either side of the back middle button you will see a switch and three (3) buttons.

3: Move "Off On Lock" switch to "Off" (left) position. You will see the unlocked symbol appear on the display.

4: Push far right button first to set your time "Zone" using the "Alarm Time" or "Radio Tune" buttons. Wait 5 seconds for the beep when done.

5: Push the "Time Set" button. (It is the one closest to the "Off On Lock" switch).

6: Use the "Alarm Time" or "Radio Tune" buttons to set the time. (Note: "PM" will appear in the upper left corner of the front display when your time is after noon!)

7: The time display will stop blinking and set about 8 seconds after your last move.

8: Push "Calen" button to set calendar. First the year the push the button again to scroll to the date.

9: Push the lock switch to the right and the lock symbol should disappear from the front display.

10: p
If you removed any buttons put them back, then put the cover back on and re install the screw.

or

Call the front desk and ask them to set or replace the clock.....

Oct 17, 2012 | Audio Players & Recorders

1 Answer

I have a rca clock and by error the time is set to wake me up how can I cancel this?The model RC46-B


Hello
To disable the wake up function completely; Press [Bell Symbol] [Music Symbol] & press '1' of '2' repeatedly unti no wake mode ikon [1-bell symbol, 1 music symbol or 2-bell symbol 2 music symbol] shows on large display. I can't include these symbols with this site, as I give you the details of the symbols.
You can download the manual of your Clock from the following website.
static.highspeedbackbone.net/pdf/RC46_DOC_Manual.pdf OK.

Jul 14, 2011 | RCA Audio Players & Recorders

1 Answer

I do not know how to set the alarm for my Sangean RCR-1 alarm clock.


Alarm settings can be made with clock/radio on or off.
The Alarm Clock/Radio is equipped with two independent alarm
systems each of which can activate the Human Wake System Buzzer
or turn on a preselected radio station.

Using Alarm with a Preselected Radio Station:
Select desired station using + or - Tuning Button [18] or select one
of the 1-7 presets.
Set the desired volume level using Alarm Level Adjustment [9]
Select alarm system 1 or 2 by pressing the alarm button [14] or [15].
Display will blink with selected alarm
Press alarm set button [16]
Display will blink showing selected alarm hour and alarm mode
and beep
Press alarm Mode button [20] to select alarm mode
Use + or - button [18] to set alarm time hours.
Press set button [16] to set minutes using + or - button to
set minutes.
Press alarm days selections 1-7 (Sunday-Saturday) to select
alarm days.
Display will show the days on which you wish to be awoken by the
radio alarm.
Pressing alarm button 1 or 2 will confirm settings and a beep and
display indicates radio alarm is set.
Note:
If alarm days or alarm mode are not selected display will blink
all the days for a few seconds indicating the alarm is not set
and the alarm will not be activated.
If you would like to be awoken to the station you are presently
listening to press alarm button 1 or 2 for more then 2 seconds.
This allows the station you are listening to be stored into
memory. Then follow above procedures.

Using Alarm with HWS Alarm Beep:
Select alarm system 1 or 2 by pressing the alarm button [14] or [15].
Display will blink with selected alarm Press alarm set button [16]
Display will blink showing selected alarm hour and alarm mode
and beep
Press alarm Mode button [20] to select alarm mode
Use + or - button [18] to set alarm time hours.
Press set button [16] to set minutes using + or - button to
set minutes
Press alarm days selections 1-7 (Sunday-Saturday) to select
alarm days.
Display will show the days on which you wish to be awoken by the
buzzer humane alarm
Pressing alarm button 1 or 2 will confirm settings and a beep and
display indicates buzzer humane alarm is set.
Note:
If alarm days or alarm mode are not selected display will blink
all the days for a few seconds indicating the alarm is not set
and the alarm will not be activated.

Cancelling Alarm Setting:
Alarm functions can be cancelled:
Select alarm system 1 or 2 by pressing the alarm button [14] or [15].
Display will blink with selected alarm
Press alarm set button [16]
Display will blink showing selected alarm hour and alarm mode
and beep
Press alarm Mode button [20] one or two times (depending if you
were in the alarm radio or alarm buzzer mode) till display blinks.
Press alarm 1 or 2 button again to confirm alarm cancellation.
The symbol will stay on the display for about 2 seconds
and disappear.
You may also select days you wish to be or not to be woken after
pressing the Set button while display is blinking. Press 1-7
(Sunday-Saturday) of button [19] to make a selection.

This is the figure of your device and you can find which button where is:


gylacz_6.jpg

Good luck!
Thanks.
gylacz

Jun 10, 2011 | Sangean RCR-1 Clock Radio

1 Answer

I need a manual for the Timex T229B clock radio. I can't even figure out how to turn off the alarm. Please tell me how I can find one - preferably free. Thanks, Patty.


I can't find the Timex T229B on the Timex support site. However, the T228B may be similar. To turn off the alarm completely, there is a switch on the left side that must be set to Off. The switch is labeled Alarm on one side and Radio on the other. In between are 4 positions - from front to back, Radio, Buzz, Off and On. When in the Off position the alarm indicator symbol will not be lit at the top left of the display (it looks a bit like a bell). The dimmer switch is in front of this Alarm/Radio switch on this side of the clock.

To turn off the alarm and reset it for the next day, press the Alarm Set/Reset button to the right of the hour and minute buttons. The Snooze button is the large button to the left of the hour and minute buttons.

Timex alarm clock and clock radio manuals are available here: http://www.timexaudio.com/product_manuals.asp .

I hope this helps.

Cindy Wells

Dec 23, 2010 | Timex T229B Clock Radio

1 Answer

How to set alarm and how to turn it off so that it is not used.


To turn on alarm, switch the selector lever to "Wake" and adjust the time shown. Then, switch the lever back to "Lock" and push the "Wake Mode" button until you see the selector dot (located on the bottom right of the time display) change to either the music or bell symbol; depending on how you'd like to be awaken.

To cancel the alarm, simply hit the "Cancel" button once, then press the "Wake Mode" button until the selector dot disappears.

Mar 10, 2009 | GE 7-4837 Clock Radio

1 Answer

SHARPER IMAGE S1785 alarm BUZZ to SOOTHER sound


Johnny, push "mode" once. The alarm symbol blinks. It is also displaying the alarm mode. Pushing "display" changes the alarm source. Bill

Sep 03, 2008 | Sharper Image SI785 Clock Radio

4 Answers

T307S How to deactivate the alarms


Timex T307S
I lost my manual also so had to resort to relentless trial and error.
The problem with the alarm is that it is too easy to turn it on.
The 1 and 2 buttons on top of the unit with the alarm clock symbol turn each alarm on or off. Your only cue is on the display in the top line of the display which will have a bell followed by “RADIO” or “SOUNDS”, if the alarm is armed. If you see this symbol and want to disarm the alarm, press the 1 or 2 alarm button according to which alarm was on the display. It’s just as easy to turn the alarm back on either deliberately or accidently
Enter Alarm Setting mode by holding the 1 or 2 alarm button for about 2 seconds.
Display will flash – in this mode you will be able to do the following
Date Set Button – changes between Everyday/Mon-Fri/Sat-Sun
Arrow Buttons – adjust the time setting
Alarm 1 (Radio):
Mode Button – changes between AM/FM1/FM2
1-6 Buttons -- changes between stations
Alarm 2 (Sounds):
Mode Button – changes between SD1/SD2/SD3/SD4/Buzzer
If you don’t change any settings for about 5 seconds the unit exits the alarm setting mode.
Timex already has your money so I guess they are not motivated to publish their manual.

Feb 08, 2008 | Timex (T307S) Clock Radio

1 Answer

Alarm


Press CANCEL and within 3 seconds, press WAKE1.  The display should change to OFF.  Repeat for WAKE2 after the clock symbol in the center of the display has cleared.
Darlene 

Nov 05, 2007 | RCA RP3722 Clock Radio

1 Answer

Remote Weather Station shows "HHH"


This means that the read is over the HIGH limit of the sensor, perhaps is too hot there. Change it to another location. josemaX

Jul 30, 2007 | GE 75295 Clock Radio

Not finding what you are looking for?
RCA RP5440 Clock Radio Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

98868 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...