Message of an Error

Q3 ERROR CODES - WHAT DO THEY MEAN? A3 Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.
Error 8.Tape Drive system defective. Eating tape or something wrong with the drive system.
Error 9.Weak RF. Try alternate frequency
NO CD.CD error message. No CD is magazine or no magazine in CD Changer.

Clarion DCZ625 Owner Manual

Good luck.
Semper Fi,
Z

Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.

For error code 6:
Try an original purchased cd with no scratches and see if the cd player reads it. If yes then lens is dirty or tired so try using a cleaning cd(has little brushes on it). If it doesn't read with the original cd try using the cleaning cd and if no go then look at purchasing a new cd player!

out of focus.
if all of your discs have the same error code 6, it is optical lens problem. have it checked to the nearest service center.

I had this problem, my boyfriend says you need to warm up the car first, but all I do is really clean the cd before I put in the cd player. Hope this helps.

Clarion Audio error codes:

Error Codes:

Error 1 Battery inside CD Changer needs to be replaced.

Error 2 CD error message. Mechanism has as eject problem or takes a long time to select CD.

Error 3 CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.

Error 4 Connection problem. Reconnect the data cable.

Error 5 CD error message. Could not read correct data due to CD ROM.

Error 6 CD error message. Could not read data from disc because it is upside-down.

Error 8 Tape Drive system defective. Eating tape or something wrong with the drive system.

Error 9 Weak RF. Try alternate frequency

Even though it says error 6 is an upside down cd, it just means the disc cant be read. usualy means the laser is dirty, out of adjustment, or not working.

well over time the cd reader in side the unit goes and that what is happen to your unit best solution replace the init

http://www.clarion.com/us/en/MungoBlobs/691/553/DRB4675(Manual).pdf

page 15

error code 6 - the cd's table of contents cannot be read (for example, disc is upside down or scratched to hell)

try to get another cd to work, or reburn the same cd and see if it works then. if none of the cd's work, maybe its time to call up the service department for clarion (800-462-5274) and see what they can do if anything.

I believe that error 6 means incompatable disc format or disc read error.

Typically means the CD is stuck, has a reading error, or the magazine is stuck. If jammed, you'll have to clear the stuck CD which may require disassembly. Try removing power and rebooting.

If all else fails, I recommend contacting a local car audio professional, or you may contact Clarion customer support directly by clicking here:

https://clarion.com/xe/en/user-support/inquiry/contactus

I trust this information has proven beneficial.

The Clarion manual lists 3 error messages.
Error 2-A disk is caught inside the CD deck and is not ejected.
Error 3-A disk cannot be played due to scratches, etc.
Error 6-A disc is loaded upside-down and cannot be played.

Good Luck.