Question about Bosch Axxis+ WFR 2460 Front Load Washer

1 Answer

Display field I have a two year old (?) bosch axxis wfr 2450 and the display field has burned out. i cannot read ANYTHING in the display area so i have been washing on the same setting for 6 months. any suggestions? can this be done at home or is there a part i need to ask for at the appliance store/ from the repair people?

Posted by on

  • blackpete Mar 16, 2008

    i have the same problem.  the screen crapped out right after the warrenty ran out.  funny how that always happens.  i did a little internet digging about two years ago, but found nothing helpful.  i like the washer, otherwise.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Not sure if the 2450 is compatible with the 2460, but here is a parts diagram that shows the display module, part #AP3854652, for $97.69 from AppliancePartsPros.com. I ordered replacement carbon brushes and a drain pump from them and have been happy with their service.

Posted on Apr 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Front Door Came off of my Bosch WFL 2060 when a huge container of detergent fell on it while open. I think I need a new Rear Door Panel, Gray, Wfl 2060/WFR 2460 because the old one is damaged, but I...


I have same problem. Washer vibrated badly during spin cycle and door subsequently came off because back panel..Mfr. # 00432074 cracked near hinge. Looks to me like hinge must first be inserted before panel replaced. I do not have proper tool either.

Sep 29, 2013 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Bosch WFR2460 washer---we also had the matching AXXIS dryer until recently--it died. Replaced the dryer with a new LG. In old system, the washer plugged into the dryer via an outlet in the 220 box on the...


Hi joecci,

It looks like the Door Lock may be faulty, but here is a few things you should consider looking at first:

1) Is the door closed properly?
2) Have you tried giving it power straight from the mains, the door lock needs the correct power before it functions correctly?

I believe one of the above things will resolve the problem, let me know if it does?

Regards

JEDEMEYER1

Jul 11, 2011 | Bosch Axxis+ WFR 2460 Front Load Washer

1 Answer

Hello, I just placed a load of laundry in my Bosch Axxis washer and set the dial to the cycle I always use. However, the water will not come into the washer, and now all of my clothes are stuck inside from...


Try selecting the spin prog, if there is any water in the washer, this will drain it, and you should be able to open the door.
Please leave comment as to whether this solved your prob or not.
Thankyou.

Nov 25, 2009 | Bosch Axxis+ WFR 2460 Front Load Washer

1 Answer

Is used Bosch Axxis WFL 2060 with door replaced a safe bet


not a bad price (poss a little bit high) but i would want to see it running on a warm wash first.

Mar 18, 2009 | Bosch Axxis WFL 2060 Front Load Washer

3 Answers

Bosch Axxis WFL 2060 washer leaks


Hi. Check the doorseal by lifting the folded lip which faces toward the drum opening. Use a torch and carefully examine the doorseal. It may have a small hole which is hard to see at first.
If door seal is ok remove top of machine and check inlet valve. Turn power off and with your hand examine the inlet water valve. If it feels damp on the solenoid then it leaks from there and finds its way around to the front of the machine though the frame work. This leak happens due to to much water pressure at your laundry taps. If so install a pressure reducing valve before the water inlet hose and replace the water inlet valve in the machine as it is now faulty.
0417362396 Melbourne metro area
Regards Sam

Mar 08, 2009 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

My Axxis wfr 2460 is not releasing the fabric softner from the drawer


You could try a tooth-brush. And after you fill your quantity of softener, top it with water till the exit level of the compartment. You could also check whether water actually pours into the compartment during the final rinsing of the clothes; in this case you should check the inlet pipe screens of your inlet pipe into the machine; which can be done without opening up the machine.

Nov 30, 2007 | Bosch Axxis+ WFR 2460 Front Load Washer

2 Answers

Bosch Axxis front loader will not drain


check filter. check no foreign objects fouling pump impellor - bra wires are the favourite

Apr 25, 2007 | Bosch Axxis WFL 2060 Front Load Washer

Not finding what you are looking for?
Bosch Axxis+ WFR 2460 Front Load Washer Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...