Question about Phase Linear UDV9010 Car DVD Player

4 Answers

Phase linear uv8 parking brake problem

One of my students got a uv8 deck and was installing it. (how he obtained it is unsure) No remote and and gounding the pink wire is not getting rid of the blue screen of death. Got any ideas?

Vegas Ace

Posted by on

  • swurvie87 May 26, 2008

    Pink wire runs out of the radio and back into the radio. nI just cant figure how to make that blue screen go away.Help!!!

  • dagr8esluvr Mar 31, 2009

    phase linear uv8.. i hooked up all the wires cd plays and i get fm cool, but what do i hook the pink wire to, or do i even need it?

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

For the uv8 to bypass the parking brake to watch dvds you have to take the pink wire and put one end to one of the screws on a two screw toggle switch connect the other end of the pink wire to the other screw and connect that to the black ground wire

Posted on Mar 17, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Put the pink wire and the ground black wire together and it will work no switches and all that extra ******** simple fix

Posted on Feb 07, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

By the remote

Posted on Sep 04, 2008

Ya yall dont know how to install it.

Posted on May 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i get my phaser linear uv8 to come on.


Check to make sure you are connecting Power (+) to positive (red) and ground (-) negative (black).

Jun 30, 2009 | Jensen VM9510 Car DVD Player

1 Answer

No cd audio from my phase linear uv8


It sounds like you have a factory amp in the vehicle. Check behind the radio to see if you have the blue wire from the deck hooked up to anything. You probably do. So take the blue with white stripe wire coming from the deck and hook that up instead of the solid blue wire.

Jan 20, 2009 | Phase Linear UDV9010 Car DVD Player

1 Answer

Jensen uv8 bypass code didn't work


no the code should work . unless jensen put a stop to the code in the newer modles.

Jan 19, 2009 | Jensen VM9510 Car DVD Player

1 Answer

Jensen uv8


They have it installed that way because they have signed a purchase agreement stating they will not bypass. If they do, they can lose the line.

Do this and you will never have to mess with the E Brake or any toggle ever again...:

1: Go into AM/FM mode
2: Hit "setup" on the remote control
3: Enter 543210 on the remote, listening for the beep for each number entered
4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen.
5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.
6: Use the unit wisely and above all safely. A ticket is one thing, causing a fatal accident due to negligence is another.

Jan 16, 2009 | Jensen VM9411 Car Video Player

2 Answers

Product jensen uv8 nov. 2007 model in a trooper 1996 auto


Hi,

The pink wire in most instances is the DVD's sensor that the vehicle is not in motion and is parked. It then allows the DVD player to display the movie not the warning message nor the blue screen.
Your description "...pink wire on a bolt attached to the body..." indicates that said wire is constantly grounded. The DVD then cannot sense that the vehicle was parked. What this tell us is that the pink wire must first have a +12VDC before it is grounded. This changeover from + to 0 is the trigger. What is required is to have a single pole double throw switch. One end terminal is wired to ACC B+12 while the other to ground with the center terminal to the pink wire. Moving the switch from position OFF to ON (+12 to GND) simulates the parking brakes condition and will enable DVD playback.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 02, 2008 | Jensen VM9510 Car DVD Player

3 Answers

Phase linear uv8 parking brake problem


i did not make this lil tutorial as i found it on the ecoustics forum at http://forum.ecoustics.com/bbs/messages/4/278797.html i do not take credit for this tutorial. i found it very helpful.


The code is a permanent way of disabling the brake override on the jensen units.


There are two ways of doing this:

Insert the DVD

After the disc loads and plays you will see a blue screen telling you "it is unlawful to drive with a movie blah blah blah"

1)Activate the brake sequence and disable the blue screen using the hand brake, the switch method or anything else to give the unit its three pulses to disable that freakin blue screen.

(What I did was I installed my radio entirely, then took the pink wire and touched for two seconds, removed for two seconds and then touched and held the negative pole of a mower battery laying on my passenger seat until the screen was no longer blue.)


2) Next, on the main remote press stop twice, then 1, 2, 6, 4.

You will now see a hidden menu that says:

Region Code
Brake Override (I know you're drooling by now)
Macrovision (Watch all the burned and pirated movies you want if this option is off)
Loader Version
Model Version


3) Using the right joystick on the unit, navigate to the options of your choice, click on them to toggle on, off or which region code you want.

This is what you want:

Region Code: 1
Brake Override ON
Macrovision: OFF

When your done, click SYS SETUP on the main remote TWICE to save the settings and bingo, your done!!! Hooray!!! You can now kill your whole family in the car while watching that adult movie while your driving.....


The other way of doing this is by not engaging the parking brake sequence, thus you're inputting the code blindly.

1) Insert the DVD and you'll get the blue screen.

(If you have more than one tv, the unit itself will have the blue screen but the additional tv's you have plugged in will NOT, they will show the dvd menu. Thus you will be able to see the hidden menu on the additional screens after inputting the code, but not on the main unit because of its blue screen.)

2) On the main remote, push stop twice and then 1, 2, 6, 4

3) Push the joystick on the unit SOUTH twice and then click it once.

4) Press SYS SETUP on the main remote twice to save your settings.


It may take a few tries but you'll get it. This method can be done if you don't want to bother temporarily activating the brake sequence, but if you only have the unit and no additional tv's, its #$%^&* damn hardbecause you can't see the settings your changing.


I tried to make this as clear as possible. If you have questions, private message me or post here.

This code DOES work.

Best of Luck!


By the way, this is for informational purposes only and I will not be responsible for anything bad/stupid/ignorant you do with your Jensen unit. fullsizechevysig.jpg

May 15, 2008 | Car Audio & Video

5 Answers

Phase Linear UV8


go to setup hit 543210 but hold 0 then turn the bake override on and then hit the X

Dec 11, 2007 | Jensen VM9510 Car DVD Player

1 Answer

How can I watch video in my UV8


no wire it to a switch and you have to flip the switch twice and leave on

Dec 10, 2007 | Jensen VM9510 Car DVD Player

2 Answers

Jensen uv8 help


The green with white is for the back up camera option, if you dont have a camera dont hook it up. If you use th remote when in the dvd mode press setup on the remote, then enter 5 4 3 2 1 0 (with the numbered keys) then holding 0 for 4 seconds, this will take you into a screen where you can shut off the parking brake overide. Now you dont have to hook up the pink wire.

Nov 25, 2007 | Jensen VM9510 Car DVD Player

Not finding what you are looking for?
Phase Linear UDV9010 Car DVD Player Logo

713 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phase Linear Car Audio & Video Experts

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

The Audio Lab

Level 2 Expert

82 Answers

Are you a Phase Linear Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...