Question about Dishwashers

2 Answers

Whirlpool dishwasher adp 5966 6th sense delay start problem

Surely if someone has accidentally set the delay start for 23 hours it must be possible to cancel it! I have switched off machine and from the electric plug for 10 mins but it still remembers its setting. Is there any way to cancel the delay start? Cannot find anything in manufacturers manual!

Posted by on

  • gavin711 Oct 22, 2008

    What a pain - there must be an easy answer!!!



  • Anonymous Dec 12, 2008

    i have the same problem .. the dishwasher is set to start in 7 hours but i want it to start now and cant change the setting even by turning the dishwasher off and back on again ... any help would be appreciated

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

You hold in the start button untill it goes off

Posted on Sep 05, 2009

  • broke ya Nov 14, 2010

    Thank you! Hamer 77 we had same problem your solution solved it instantly!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just keep on pushing the "Start Delay" button - It cycles the counter from 0 through to 23.

Posted on May 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool quiet partner iv. Turn breaker off then on. Displays 4H then goes off few mins later. Press the cancel button and then the POTS AND PANS along with NORMAL buttons start flashing back and forth.


this is not from me but i found it and am passing on..
Hi


Thanks for using FixYa. Error code 4h means 4 hour delay start which means that the dishwasher is in delay start mode and has been set to 4 hours. You can either wait for 4 hrs or to start it immediately press the cancel button to cancel the delay start option. After this program the cycle and options and press Start again as the dishwasher will not start the wash until it reaches the delayed hour i.e. till 4hrs. If after 4 hrs still the light blinks and it wont start then you'll have to replace the control panel. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Dec 28, 2017 | Whirlpool Dishwashers

1 Answer

Purple light is on and cycle won't start


It's possible that you have put the dishwasher into delay mode. Try powering off at the powerpoint as this will force a reset of all programming.



The pause/start button also sets the Delay Start feature which can delay the start of a wash program
from 1 to 12 hours.


To cancel Delay Start
Press the I button.

Dec 30, 2012 | Fisher and Paykel 23 in. DD-603SS Built-in...

3 Answers

Whirlpool adp 5540


My dishwasher isnt working anymore after i cleaned the filters? i took out and cleaned the filters in it and now it doesnt seem to be working properly. it goes thru the cycle but its not cleaning. the dishwashing tablet falls to the bottom and isnt even dissolved completetly after the cycle has finished. is it possible that its blocked somewhere?
It is a Whirlpool ADP 5540
thanks for your help
**** the walls are still dirty after the cycle but there is steam in there as if its done its normal cycle

May 13, 2008 | Whirlpool 24 in. ADP5966 Free-standing...

3 Answers

Whirlpool dishwasher


We had same problem with our ADP 5966. An engineer over the phone said he thought it was related to machine being unable to drain. I checked the drainage pipe connection to u-bend under sink, and sure enough, there was a major blockage. Cleared that and hey presto, problem solved.

Jul 31, 2006 | Whirlpool 24 in. ADP5966 Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

984 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

83036 Answers

Brad Brown

Level 3 Expert

17490 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...